Archive:ODROID: Difference between revisions
No edit summary |
m (Karellen moved page ODROID to Archive:ODROID without leaving a redirect: Outdated. Hardware from 2016) |
(No difference)
|
Revision as of 01:36, 8 July 2020
![]() |
![]() |
![]() |
![]() |
These pages are maintained by the community and should not be considered an endorsement or recommendation. Device pages are made when there's a bunch of useful information for a particular device, and someone takes the time to make that page. Keep in mind, some devices simply don't need a page of specific information, but are still excellent devices. * |
ODROID is a series of powerful ARM-based single-board computers (developer boards), manufactured by Hardkernel Co., Ltd., an open-source hardware company located in South Korea, capable of running Android or Linux. Kodi was easly on first ported for use on Hardkernel ODROID-X, X2, U2, U3, XU, XU2, XU3 and XU3 Lite. And later Kodi has also been ported to the ODROID-C series, and today ODROID-C/C+ and ODROID-C2 supports Full 1080p (Full HD) video playback of the most commonly used codecs, including support for most if not all Kodi add-ons, as well as offering very good GUI performance.
The ODROID series was at first primary designed to act as a development platform for developers wanting to prototype embedded systems based on Samsung Exynos 3, 4, and 5 series of System-on-Chips (SoC), but have since also been made popular for multi-purpose use by low-power device enthusiasts and hobbyist alike, including those using it for as HTPC (Home Theater PC) for Kodi. And today the ODROID-C series are based on Amlogic SoCs which are primarly designed to be used in media players.
Overview
Even though the product name ‘ODROID’ is a portmanteau of ‘open’ + ‘Android’, the hardware isn't actually fully open source because some parts of the design are still retained proprietary by the Hardkernel company or by ARM itself, such as the graphics drivers. As a home media center this line of boards offers a very cheap HTPC clients that as a media player in many cases works better than similar devices like the Raspberry Pi series.
The best option for Kodi is to use the LibreELEC distribution made by user wrxtasy at the Hardkernel Forums. However the official Ubuntu image from HardKernel also includes a modified version of Kodi (though often outdated and can not be easily updated).
Odroid C series
The Odroid C1, C1+, and C2 from Hardkernel's C series are very low cost (around $35 to $ 45 USD as of early 2017) and very good performance as a HTPC clients. Having a C1/C1+/C2 installed with LibreELEC is very simple to setup and works exceptionally well. The C1/C1+/C2 handles most skins without lag. There are however a few heavier skins like Aeon MQ* that will lag a little bit, but not what would be considered beyond acceptable for everyday use. Video performance is great. Odroid-C1 and C1+ can playback 1080p / Full HD Blu-ray Disc (H.264) rips @ 30 FPS plays very fluid even if streamed over WiFi with good signal. And the newer Odroid-C2 which is also capable of playing back videos encoded with the HEVC (H.265) at up to 2160p / Ultra HD @ 30 FPS, and as such outperforming all current versions from Raspberry Pi.
Installing Kodi (LibreELEC)
Installation is pretty simple for the LibreELEC Builds, (installing done from a Windows computer):
- Download The LibreELEC Disk Imager: https://libreelec.tv/downloads/
- Download The disk image for your odroid:
- For the C1 or C1+ use the latest image from here: http://forum.odroid.com/viewtopic.php?f=144&t=26222 (Download the img.gz file.)
- For the C2 use this one: http://forum.odroid.com/viewtopic.php?f=144&t=25742 (Download the img.gz file.)
- Insert your SD card or eMMC and start the LibreELEC Disk Imager.
- Select The Odroid C2 version (Same for the C1 and C1+)
- Click Select File and find the img.gz you downloaded
- Select the SD card or eMMC. (Be careful, this will erase the select drive. Be sure you have the correct one)
- Click Write and let it finish.
- Insert the SD or eMMC into your odroid, plug your HDMI and Wifi module in before you plug the power in.
- The Odroid will start and show the LibreELEC Logo for a few minutes. The Odroid will then restart and Boot into Kodi. You will be greeted with the LibreELEC startup screen. Follow the prompts and you will be enjoying in no time.
Other Software Options
- Ubuntu-based - Head to the wiki page for your board for the current Ubunut image. http://odroid.com/dokuwiki/doku.php
- Android - HOW-TO:Install Kodi for Android
Links
- Hardkernel ODROID website - http://hardkernel.com