Settings/Player/Videos

From Official Kodi Wiki
Jump to navigation Jump to search
Home icon grey.png   ▶ Settings ▶ Player ▶ Videos

This category contains the settings for the playback of videos


Actions

Settings - Player - Videos - Action.jpg


Play next video automatically

Settings level: Basic
Description: A multiselect window gives the option to define which kind of video item will be played next automatically. Available options are: Music Videos, TV shows, Episodes, Movies and Uncategorized.


Skip steps

Settings level: Standard
Description: Defines the amount of time each press of the Skip button will skip forward or backwards. A single press will skip 10 sec forward or back. A double press will skip 30 sec forward or back and so on for each subsequent quick press. Use this setting to change the default skip values.


Skip delay

Settings level: Standard
Description: Works with the previous setting. If you are having difficulty with the quick multiple presses, this setting allows you to increase the time delay between presses. The selection is none (which will cause the skip step to happen immediately and multiple presses are not possible) or a value between 250 - 3000ms (milliseconds). The default is 750ms.


Playback

Settings - Player - Videos - Playback.jpg


Adjust display refresh rate

Settings level: Standard
Description: This setting will switch the refresh rate of the TV / monitor to best match the frame rate of the video stream. This allows for perfectly smooth video playback. This option requires compatible hardware. [1]

Using this setting may cause the TV or monitor to blank for a few seconds while adjustments are made. This is the TV adjusting for the new refresh rate and not Kodi.
Four settings are available:

  1. Off - The default setting. No adjustments are made and output is at a fixed display refresh rate, usually the rate set in the GPU
  2. Always - Adjustments are made whenever a frame rate change is detected by Kodi (not recommended)
  3. On start/stop - When required, adjusts the refresh rate when starting and stopping video playback
  4. On start - When required, adjusts the refresh rate on start of video playback only. On some systems this may cause stuttering when navigating the menu system after playback stops.


Adjust display HDR mode

Settings level: Standard
Description: This setting allows the application to control the HDR mode of the screen.[2]
  • On - Switch on or off the HDR mode of the display to best match the played media.
  • Off - The current HDR mode of the display is respected and tonemapping is applied as needed for proper display of the media.

Note: setting available on platforms that support HDR, with an HDR-capable screen connected.


Sync playback to display

Settings level: Standard
Description: This setting enables the syncing of the video to the refresh rate of the monitor by altering the playback speed. When used in conjunction with the previous setting it allows a "fine tune" syncing.

For example - watching a movie recorded at 23.967fps on a TV / monitor that is only capable of 50Hz will cause micro stutters, especially during panning shots. When this setting is enabled, the video playback is sped up to 104.271% of its original speed which simulates 25fps playback being a simple division of 50Hz.

Stop hand.png Be aware that using this setting will disable Audio Passthrough as Kodi may be required to adjust the audio stream to enable synchronisation of the video and audio streams to the display.


Minimise black bars

Settings level: Advanced
Description: Stretches the video to minimise black bars.

Note: May deform the image.


Display 4:3 videos as

Settings level: Advanced
Description: Determines the zoom level that 4:3 videos are shown on widescreen displays.

Options are: Normal, Wide zoom, Stretch 16:9, Stretch 16:9- Nonlinear, Zoom
Normal is no change to the picture. All other settings will deform or crop the picture.


Processing

Settings - Player - Videos - Processing.jpg


Render method

Settings level: Advanced
Description: Controls the method used by the player to process and display the video, (which is called rendering).


Enable HQ scalers for scaling above

Settings level: Advanced
Description: Use high quality scalers when upscaling a video by at least this percentage. A value below 5% makes little sense as video is processed with high GPU load without any visible picture quality improvements


Allow use DXVA Video Super Resolution

Settings level: Advanced
Description: Enables advanced DXVA upscaler using NVIDIA RTX Video Super Resolution or Intel Video Super Resolution.
Used when video source is 1080p or less and the source resolution is lower than the display resolution.
It is only available on specific hardware: NVIDIA RTX 20xx, 30xx, 40xx and above, Intel Arc A770, A750.[3]

When used on compatible systems, it may reduce video compression artifacts and somewhat increases the sensation of sharpness and is more noticeable when viewing lower quality videos.
This facility first needs to be enabled in the NVIDIA or Intel Graphics Control Panel. Once enabled, and depending on the settings level chosen and quality of video file, power consumption by the graphics card may considerably increase.
Not ideal for low powered devices. [4]


Platform Specific settings

The following settings will show up for the Processing section for their respective platforms:


Use high precision processing

Settings level: Advanced
Description: Conversion of 8 bit YUV to RGB is not an exact process with 8 bits destination texture, but can be improved with the use of 10 bits. When enabled the player attempts to find a compatible format of 10 bits or better.

May increase the load on low powered devices. [5]


Allow HDR dynamic metadata formats

Settings level: Expert
Description: Improves compatability issues on low-powered or older devices by allowing users to choose the preferred dynamic HDR format for playback suitable for the device or no formats. This is accomplished by ignoring the metadata from the bitstream prior to decoding.[6] [7]



Stereoscopic 3D

Settings - Player - Videos - Stereoscopic - 3D.jpg


Playback mode of stereoscopic videos

Settings level: Advanced
Description: Select which mode stereoscopic 3D videos will be played.

Ask me - Will show a dialogue to select the desired mode for each playback.
Preferred mode - Will use the preferred mode specified in the "system->Video hardware" section of the settings.
Monoscopic/2D - Will play the video in mono/2D.
Ignore - Disables any stereoscopic 3D processing and handling.


Disable stereoscopic mode when playback is stopped

Settings level: Advanced
Description: While enabled the GUI and some TVs will switch back to 2D mode between videos in a playlist or when playback has ended. While disabled, the GUI and TV will stay in stereoscopic 3D mode. For video playlists with mixed stereoscopic 3D and 2D content, then the GUI will also stay in stereoscopic 3D mode even when a non-stereoscopic 2D video is playing.


Teletext

Settings - Player - Videos - Teletext.jpg


Activate Teletext

Settings level: Advanced
Description: Enables Teletext when watching a live TV stream.


Scale Teletext to 4:3

Settings level: Advanced
Description: When selected, scales Teletext to 4:3 ratio.


References




Return to top