Archive:Web Server HTTP API
HTTPAPI DOC
This document provides information on XBMC’s Application Programming Interface (API). The API operates over the HyperText Transfer Protocol and hence is called "HTTPAPI".
The same set of commands is also available over ASP and from Python (see later section).
Apart from where indicated by a date indicating when a command was added/modified this documentation describes what's available in XBMC 8.10.
Getting started
The XBMC HTTP API provides a mechanism for a networked device (e.g. a PC or a PDA with WiFi) to interact with XBMC. The API provides access to XBMC status information and control of XBMC functions.
The API can be called from and results displayed in a standard web browser which is probably the easiest way to experiment with these commands. Fire up your browser and enter the following into the address field:
http://xbox/xbmcCmds/xbmcHttp?command=getcurrentlyplaying
Information about the media currently being played by XBMC will be displayed, if nothing is being played then "[Nothing Playing]" will be displayed.
If you want to control the volume of XBMC enter the following into your browser’s address field:
http://xbox/xbmcCmds/xbmcHttp?command=setvolume(80)
"OK" will be displayed and the volume will be set to 80% which you will probably find is rather quiet.
If you find that the above commands don’t work then check that:
- The address "xbox" is understood by your browser to point to your Xbox’s address. You may need to enter the full IP address e.g. 192.168.0.1
- The XBMC web server has been turned on. This setting can be found in Settings, Network, Server.
- You didn’t mistype the command.
Note: If you are a Windows user, you can configure a name for your Xbox's IP address.
Edit with your favorite text editor the file “hosts” inside C:\WINDOWS\system32\drivers\etc\ and add a line at the end with your xbox ip address.
192.168.0.1 xbox
Save it (don't need to restart) and test if the command “ping xbox” works. You should now resolve your Xbox IP address
If you still can’t get them working, try:
http://xbox
This should display the default XBMC web page. If this does not work then check out other XBMC documentation on the web server and come back when it is working.
Once you have the above working we can look at the structure of the http command line.
All API commands start with the following:
http://xbox/xbmcCmds/xbmcHttp?command=
(Remember you may need to swap “xbox” for the IP address.)
The next part of the line is the command itself, which in the two examples above are "getCurrentlyPlaying" and "setVolume". The command is not case sensitive: "SetVolume", "setvolume" and "SETVOLUME" can also be used.
If the command takes parameters then enclose them in "(" and ")" (the old syntax of appending with "¶meter=" still works).
Finally comes the parameter values. Depending on the command the parameter values may or may not be case sensitive. It is always safest to assume the values are case sensitive. If there are multiple parameters then each value is separated by a semi-colon ";". The following is an example of a command with 4 parameters.
http://xbox/xbmcCmds/xbmcHttp?command=takescreenshot(test.jpg;false;0;300;200;90)
To pass a semi-colon as a parameter (rather than a separator) use two semi-colons ";;".
To pass an empty parameter insert a space between the semi-colons "; ;".
To pass an empty parameter as the last (right most) parameter use "%20" (if just a space is appended to the end, the browser will remove it and xbmc will not detect the final parameter).
In fact any character that is causing problems can be encoded using the standard %xx format (RFC1738) before being passed to the API.
The new function calling syntax (rather than the old "¶meter=" syntax) is much the preferred approach since it is easier for XBMC to determine the end of the command i.e. the closing bracket. This is important when issuing commands from a browser environment e.g. using Javascript because a typical way of ensuring the browser does not use a cached response from a previous initiation of a command is to use the syntax
var url = 'http://xbox/xbmcCmds/xbmcHttp?command=SetPlaylistSong(1)?nocache=' + new Date().getTime();
The date.getTime() ensures always a unique number is included in the call and hence the browser can't use a previously cached response. XBMC ignores everything after the ')' and hence doesn't get confused by the rest of the line.
The use of the function syntax is also recommended for commands without parameters:
var url = 'http://xbox/xbmcCmds/xbmcHttp?command=GetCurrentlyPlaying()?nocache=' + new Date().getTime();
Response Structure
The API returns information in a consistent form but which is dependent on the type of information returned. Those commands which:
- don’t return a value e.g. SetVolume return the standard response OK
- return a single value e.g. GetVolume return just the value
- return multiple values e.g. GetCurrentlyPlaying return multiple lines with each line having the format
- name:value
An error in the execution of a command, for example a missing parameter, is indicated by the response:
Error[:Reason]
i.e. all errors are indicated by returning "Error" and depending on the error there may be additional information provided.
e.g.
Error:Missing parameter
The following is the default response format. To change the format see the command SetResponseFormat.
Every line in the response is prefixed by the HTML tag <li>. The only exception to this is the GetThumb command where a prefix is not included. The use of this prefix means that the responses are displayed clearly within a browser but the <li> tag does not require a corresponding close tag i.e. </li> is not required.
Finally, and to create a valid HTML response, the whole response is top and tailed with the web server’s default header and footer.
Sample Code
Probably the easiest way to get up to speed with a new API is to have a look at code. Several of the applications that can be found here: HTTPAPI client apps come with source code. In particular look for the file XBMCHttpInterface.vb which wraps up the majority of the HTTP API within a .Net class. The file can be found within the package XBMCControl. There are also examples that show how to call the HTTP API from an Excel spreadsheet and from Visual Basic 6.
ASP
The commands are also available as ASP commands using the command "xbmcAPI" just as the current "xbmcCommand" works now (see default.asp in the XBMC web directory). All xbmcAPI commands have an identical name and the same parameters as the commands listed in the document. The response structure is also identical apart from the web server’s default header and footer which will not be present.
e.g.
Response = xbmcAPI("GetCurrentlyPlaying");
Python
The commands are also callable from Python scripts through the function executehttpapi imported from the xbmc module. All xbmcAPI commands have an identical name and the same parameters as the commands listed in the document. The response structure is also identical apart from the web server’s default header and footer which will not be present.
e.g.
import xbmc
response = xbmc.executehttpapi("TakeScreenShot(q:\\test.jpg,false,0,300,200,90)")
Broadcast
The Broadcast functionality is not strictly speaking part of the HttpApi in that it does not use the HTTP protocol. However, it is controlled via HttpApi commands and would typically be used as an adjunct to the HttpApi and so is presented here.
The HttpApi is a “pull” architecture – HttpApi interacts with XBMC by making calls to XBMC. For an HttpApi client to maintain a dynamic up-to-date display, e.g. of the currently playing song, the client needs to continually poll XBMC for its status.
The Broadcast facility provides the opposite approach – XBMC makes calls out (i.e. broadcasts or "pushes") indicating significant events to anything that just happens to be listening.
The Broadcast facility uses the UDP broadcast protocol with a default port setting of 8278. (8278 was chosen for no other reason than it was the first unregistered port that I stumbled across.) For a client to receive these broadcasts, the client must register to receive the broadcasts (the method of doing so will depend on the language/technology of the client). XBMC broadcasts on the IP address 255.255.255.255 which is the limited broadcast address. Sending a UDP datagram to this address delivers the message to any host on that broadcast network. Because routers never forward messages sent to this address, only hosts on the connected network see these broadcasts, i.e. the client will need to be on the local network to receive the broadcasts.
The actual broadcasts are delimited by <b></b> and may consist of a numerical or textual description of the event (depening on the event) followed by ";" and the level of the event (e.g. 1 or 2).
An example Windows client (with source code), XBMC Listener, that listens to these broadcasts can be found here
The Commands
This section presents a complete list of HTTP API commands. In the list, after the command name is presented, the text between the parentheses is the list of semi-colon separated parameters for the command.
Remember to use the syntax:
http://xbox/xbmcCmds/xbmcHttp?command=setvolume(80)
or, if you really wish, the old syntax:
http://xbox/xbmcCmds/xbmcHttp?command=setvolume¶meter=80
A parameter in square brackets is optional. An optional parameter typically specifies an alternative to a default value.
In the following list the Playlist parameter identifies one of the two available playlists by using the values 0 or 2:
0. Music playlist 1. Video playlist
These playlists should not be confused with:
The slideshow playlist. The slideshow commands implicitly refer to the latter. Playlist files e.g m3u files.
The commands are presented in five sections. Those commands that:
- retrieve information
- set/modify information
- perform/initiate an action
- perform an action on a file
- don’t fit into one of the above and hence are miscellaneous
- HTTPAPI commands and examples
Assuming you have XBMC running and configured appropriately, clicking on the example link should load the link in your browser window. Then edit the link (if necessary): changing xbox to your Xbox IP (e.g. 192.168.1.101). As an example:
http://xbox/xbmcCmds/xbmcHttp?command=GetCurrentlyPlaying -> http://192.168.1.101/xbmcCmds/xbmcHttp?command=GetCurrentlyPlaying
However, the most straightforward approach is to add xbox to your hosts file as described in the Getting Started section, after which you would not need to substiture your Xbox IP for xbox.
Some of the examples will work straight off, others, which for example refer to a specific file, will need you to manually modify the link to appropriate values for your environment.
'%20' is used in some of the examples which is just an alternative way of indicating a space (' '). The reason for using %20 is just to ensure that the document formatting keeps the entire http:// string as one object. If you are typing the command in manually or using it from your own code then you can either use %20 or a space.
Retrieving information commands
| Command | Information | Example |
|---|---|---|
| GetMediaLocation(type; [path]; [option]; [lineStart; [numLines]]) | Type is one of music, video, pictures, files.
path is the path. option is one of pathsonly, showdate lineStart is the first item in the list to return (first entry is 0 not 1) and numLines is the number of items to return. numLines cannot be specified without specifying lineStart. If numLines is not specified then all entries from lineStart to the end of the list will be returned. |
http://xbox/xbmcCmds/xbmcHttp?command=GetMediaLocation(music;f:\;pathsonly)
Return only the first 10 items: http://xbox/xbmcCmds/xbmcHttp?command=Getmedialocation(music;f:\music\;0;10) Return the next 10 items: http://xbox/xbmcCmds/xbmcHttp?command=Getmedialocation(music;f:\music\;10;10) |
| GetShares(type; [option]) | Type is one of music, video, pictures, files.
option is one of pathsonly, appendone |
http://xbox/xbmcCmds/xbmcHttp?command=GetShares(music) |
| GetCurrentPlaylist | Retrieves the current playlist identifier. | http://xbox/xbmcCmds/xbmcHttp?command=GetCurrentPlaylist() |
| GetCurrentlyPlaying([thumbFilename],[nothingPlayingFilename],[onlyIfChanged]) | Retrieves the filename, details and status of the currently playing media.
If onlyIfChanged = true then information will only be returned if the media's status has changed since the last time this command was called. A tag has been added, Changed, that indicates whether the media has changed since the last time this command was called. Additional functionality has been added to help simplify a browser based client's display of the current playing media's thumbnail. If thumbFilename is specified then on calling GetCurrentlyPlaying the current media's thumbnail is saved to the file thumbFilename. This filename should include the absolute path on the XBox (from the perspective of XBMC) to where to store the thumbnail. The location should be such that it is exposed by XBMC's web server e.g. q:\web\thumb.jpg. nothingPlayingFilename is the thumbnail to display if nothing is currently playing. Again it should include the complete path to an image file from the perspective of XBMC (nothingPlayingFilename is copied to thumbFilename when GetCurrentlyPlaying is called and nothing is playing). All the client needs to do is point their browser at the served address of thumbFilename. |
http://xbox/xbmcCmds/xbmcHttp?command=GetCurrentlyPlaying
http://xbox/xbmcCmds/xbmcHttp?command=GetCurrentlyPlaying(q:\web\thumb.jpg) http://xbox/thumb.jpg (this will display the thumbnail generated by the above call) |
| GetCurrentSlide | Retrieves the file name of the image currently being displayed. | http://xbox/xbmcCmds/xbmcHttp?command=GetCurrentSlide() |
| GetDirectory(directory;[mask];[option]; [lineStart; [numLines]]) | Retrieves the contents of the directory specified by directory.
If option = 1 ( or = showdate) then file modified dates will be appended. mask can take the following form: .mp3 or [music] (and the obvious corresponding values for other media types and file extensions) and returns just the matching files. (To specify multiple file extensions use the bar "|" character e.g. .mp3|.wma.) mask can also take the form: "*" or "/" and returns just folders. An empty mask (i.e."") returns all files and folders. lineStart is the first item in the list to return (first entry is 0 not 1) and numLines is the number of items to return. numLines cannot be specified without specifying lineStart. If numLines is not specified then all entries from lineStart to the end of the list will be returned. |
http://xbox/xbmcCmds/xbmcHttp?command=GetDirectory(F:\music\;.mp3;1)
Return only the first 10 items: http://xbox/xbmcCmds/xbmcHttp?command=GetDirectory(F:\music\;.mp3;1;0;10) Return the next 10 items: http://xbox/xbmcCmds/xbmcHttp?command=GetDirectory(F:\music\;.mp3;1;10;10) |
| GetGuiDescription | Retrieves various GUI values. (Currently just the screen resolution) | http://xbox/xbmcCmds/xbmcHttp?command=GetGUIDescription() |
| GetGuiSetting(type; name) | Retrieves the value of GUI setting name. type specifies whether the setting is of type integer (0), boolean (1) or float (2) which must be set correctly or could cause a crash. name is the name of the setting to get the value of. For a list of setting names see GUISettings.cpp. | http://xbox/xbmcCmds/xbmcHttp?command=getguisetting(0;system.shutdowntime) |
| GetGuiStatus() | Retrieves various information about the status of the GUI. | http://xbox/xbmcCmds/xbmcHttp?command=getGUIStatus() |
| GetMovieDetails(mediaPath) | Retrieves details of the movie mediaPath | http://xbox/xbmcCmds/xbmcHttp?command=getMovieDetails(f:\movies\test.avi) |
| GetPercentage | Retrieves the current playing position of the currently playing media as a percentage of the media’s length. | http://xbox/xbmcCmds/xbmcHttp?command=getpercentage() |
| GetPlaylistContents([playlist]) | Retrieves the contents (file names) of the current playlist or the playlist specified by playlist. Playlist takes one of the following values: 0 – Music playlist, 1 – Temporary music playlist, 2 – Video playlist, 3 – Temporary video playlist. (Since 26 Nov 2006: 0 - Music playlist, 1 - Video playlist) | http://xbox/xbmcCmds/xbmcHttp?command=GetPlaylistContents(1) |
| GetPlaylistLength([playlist]) | Retrieves the length of the current playlist or the playlist specified by playlist. | http://xbox/xbmcCmds/xbmcHttp?command=GetPlaylistLength(0) |
| GetPlaylistSong([position]) | Retrieves the currently playing song number in the playlist. If the optional parameter position is provided the command will return the file name of the media at location position in the playlist. | http://xbox/xbmcCmds/xbmcHttp?command=GetPlaylistSong() |
| GetPlaySpeed | Retrieves the current playing speed. | http://xbox/xbmcCmds/xbmcHttp?command=GetPlaySpeed() |
| GetMusicLabel(item) | Retrieves audio information relating to the currently playing media. The specific information to retrieve is specied by info which is an integer corresponding to one of the MUSICPLAYER_* constants that can be found in GUIInfoManager.h The example retrieves the codec currently being used. | http://xbox/xbmcCmds/xbmcHttp?command=GetMusicLabel(217) |
| GetRecordStatus | Retrieves whether XBMC is in record mode. | http://xbox/xbmcCmds/xbmcHttp?command=GetRecordStatus() |
| GetVideoLabel(item) | Retrieves video information relating to the currently playing media. The specific information to retrieve is specied by info which is an integer corresponding to one of the VIDEOPLAYER_* constants that can be found in GUIInfoManager.h The example retrieves the rating of the video currently being played. | http://xbox/xbmcCmds/xbmcHttp?command=GetVideoLabel(270) |
| GetSlideshowContents | Retrieves the contents (file names) of the slideshow playlist. | http://xbox/xbmcCmds/xbmcHttp?command=GetSlideshowContents() |
| GetSystemInfo(InfoIds) | Retrives System Information by id number(the information on the system info page in xbmc). You can supply multipal numbers if you wish to retreive a bunch at a time. This sample will get Version of XBMC & Build Date. For a full list of Id's see GUIInfoManager.h. | http://xbox/xbmcCmds/xbmcHttp?command=GetSystemInfo(120;121) |
| GetSystemInfoByName(InfoNames) | Retrives System Information by name (the information on the system info page in xbmc). You can supply multipal names if you wish to retreive a bunch at a time. Go down to the "CGUIInfoManager::TranslateSingleString" section in GUIInfoManager.cpp and you will find all the InfoNames values | http://xbox/xbmcCmds/xbmcHttp?command=GetSystemInfoByName(weather.location;weather.temperature) |
| GetTagFromFilename(filename) | Retrieves information for the audio file filename | http://xbox/xbmcCmds/xbmcHttp?command=GetTagFromFilename(F:\music\test.mp3) |
| GetThumbFilename(album;location) | Retrieves the file name of the corresponding thumbnail for the music media file with file name album and path location | http://xbox/xbmcCmds/xbmcHttp?command=GetThumbFilename(test.mp3;F:\music\) |
| GetVolume | Retrieves the current volume setting as a percentage of the maximum possible value. | http://xbox/xbmcCmds/xbmcHttp?command=GetVolume() |
| GetLogLevel | Retrieves XBMC's current log level | http://xbox/xbmcCmds/xbmcHttp?command=GetLogLevel() |
| QueryMusicDatabase | Provides a SQL interface to the XBMC Music Database. While this command is described in this section (Retrieving Information) it is possible to use it to modify the data base.
WARNING: The commands that modify the data base can obviously damage and/or lose information within it; but also some of the read commands can be so complex or retrieve so much data that it can impact the operation of XBMC e.g. retrieving all songs from a reasonably large data base can bring xbmc to its knees. |
http://xbox/xbmcCmds/xbmcHttp?command=querymusicdatabase(select%20strArtist%20from%20artist%20order%20by%20strArtist) |
| QueryVideoDatabase | Provides a SQL interface to the XBMC Video Database. See QueryMusicDatabase for further information. | http://xbox/xbmcCmds/xbmcHttp?command=queryvideodatabase(select%20path.strpath%20from%20path) |
Setting commands
| Command | Information | Example |
| AddToPlayList(media;[playlist];[mask];[recursive]) | Adds a file or folder (media is either a file or a folder) to the current playlist or the playlist specified by playlist. To specify a file mask use mask e.g. .mp3|.wma.
If recursive = "1" and media is a folder then all appropriate media within subfolders beneath media will be added otherwise only media within the folder media will be added. Default behaviour is to be recursive. mask can now also be set to one of the following values [music], [video], [pictures], [files] in which case XBMC's current set of file extensions for the type specified will be used as the mask. |
http://xbox/xbmcCmds/xbmcHttp?command=AddToPlayList(F:/music/test2.mp3;1) |
| AddToSlideshow(media;[mask];[recursive]) | Adds a file or folder (media is either a file or a folder) to the slideshow playlist. To specify a file mask use mask e.g. .jpg|.bmp
If recursive = "1" and media is a folder then all appropriate media within subfolders beneath media will be added otherwise only media within the folder media will be added. Default behaviour is to be recursive. mask can now also be set to one of the following values [music], [video], [pictures], [files] in which case XBMC's current set of file extensions for the type specified will be used as the mask. (Note it only makes much sense for this command to use a value of [pictures]. |
http://xbox/xbmcCmds/xbmcHttp?command=AddToSlideshow(F:\apps\xbmc\media\) |
| ClearPlayList([playlist]) | Clears the current playlist or the playlist specified by playlist. | http://xbox/xbmcCmds/xbmcHttp?command=ClearPlayList(1) |
| ClearSlideshow | Clears the slideshow playlist. | http://xbox/xbmcCmds/xbmcHttp?command=ClearSlideshow() |
| Mute | Toggles the sound on/off. | http://xbox/xbmcCmds/xbmcHttp?command=Mute() |
| RemoveFromPlaylist(item,[playlist]) | Removes media from the current playlist or from playlist playlist. item can be either an integer specifying the position in the playlist of the item to be removed or the complete path (including filename) of the media to be removed. It is not possible to remove the media if it is currently being played. | http://xbox/xbmcCmds/xbmcHttp?command=RemoveFromPlaylist(f:\test2.mp3;1) |
| SeekPercentage | Sets the playing position of the currently playing media as a percentage of the media’s length. | http://xbox/xbmcCmds/xbmcHttp?command=SeekPercentage(50) |
| SeekPercentageRelative | Adds/Subtracts the current percentage on to the current postion in the song | http://xbox/xbmcCmds/xbmcHttp?command=SeekPercentageRelative(-10) |
| SetCurrentPlaylist(playlist) | Sets the current playlist to playlist. | http://xbox/xbmcCmds/xbmcHttp?command=SetCurrentPlaylist(1) |
| SetGUISetting(type; name; value) | Sets the value of GUI setting name to value. Type specifies whether the setting is of type integer (0), boolean (1) or float (2) which must be set correctly or could cause a crash. For a full list of setting names see GUISettings.cpp. | http://xbox/xbmcCmds/xbmcHttp?command=SetGUISetting(0;system.shutdowntime;10) |
| SetPlaylistSong(position) | Sets the media at playlist position position to be the next item to be played. The example sets the position to the 6th song in the playlist | http://xbox/xbmcCmds/xbmcHttp?command=SetPlaylistSong(5) |
| SetPlaySpeed(speed) | Sets the playing speed to the integer speed. | http://xbox/xbmcCmds/xbmcHttp?command=SetPlaySpeed(speed) |
| SlideshowSelect(filename) | Sets the slideshow playlist position by specifying the file name of the next image to show. | http://xbox/xbmcCmds/xbmcHttp?command=SlideshowSelect(filename) |
| SetVolume | Sets the volume as a percentage of the maximum possible. | http://xbox/xbmcCmds/xbmcHttp?command=SetVolume(50) |
| SetLogLevel | Sets XBMC's log level | http://xbox/xbmcCmds/xbmcHttp?command=SetLogLevel(1) |
| SetAutoGetPictureThumbs | If set to True then media thumbnails will be automatically created when required. (Default: True.) | http://xbox/xbmcCmds/xbmcHttp?command=SetAutoGetPictureThumbs(false) |
Action commands
| Command | Information | Example |
| Action | Sends a raw Action ID (see key.h) to xbmc. Be careful with this one since it runs the action on the webserver thread and depending on the action could lock the GUI thread. The example sends ACTION_MOVE_DOWN. | http://xbox/xbmcCmds/xbmcHttp?command=Action(4) |
| Exit | Reboots to dashboard | http://xbox/xbmcCmds/xbmcHttp?command=Exit() |
| KeyRepeat(rate) | Sets whether and how fast a key sent using SendKey should repeat. rate is the repeat rate in milliseconds (e.g. 1000 = 1s). rate = 0 stops keys repeating. | http://xbox/xbmcCmds/xbmcHttp?command=KeyRepeat(1000) |
| Move(deltaX, deltaY) | Moves the currently displayed and ZOOMed (see zoom command below) image by the distance specified by deltaX and deltaY. The zoom magnification must be greater than 0 or the command has no effect. | http://xbox/xbmcCmds/xbmcHttp?command=Move(50;20) |
| Pause | Pauses the currently playing media. | http://xbox/xbmcCmds/xbmcHttp?command=Pause() |
| PlayListNext | Starts playing the next media in the current playlist. | http://xbox/xbmcCmds/xbmcHttp?command=PlayListNext |
| PlayListPrev | Starts playing the previous media in the current playlist. | http://xbox/xbmcCmds/xbmcHttp?command=PlayListPrev |
| PlayNext | Starts playing/showing the next media/image in the current playlist or, if currently showing a slidshow, the slideshow playlist. | http://xbox/xbmcCmds/xbmcHttp?command=PlayNext() |
| PlayPrev | Starts playing/showing the previous media/image in the current playlist or, if currently showing a slidshow, the slideshow playlist. | http://xbox/xbmcCmds/xbmcHttp?command=PlayPrev() |
| PlaySlideshow([directory];[recursive]) | Starts the slideshow. Directory specifies a folder of images to add to the slideshow playlist. If recursive has a value of True then all directories beneath directory are searched for images and added to the slideshow playlist. | http://xbox/xbmcCmds/xbmcHttp?command=PlaySlideshow(F:\pictures;true) |
| PlayFile(filename;[playlist]) | Starts playing the media file filename on playlist playlist or if playlist is not specified the current playlist. | http://xbox/xbmcCmds/xbmcHttp?command=PlayFile(F:\music\test.mp3) |
| Reset | Resets XBMC | http://xbox/xbmcCmds/xbmcHttp?command=Reset() |
| Restart | Restarts XBOX | http://xbox/xbmcCmds/xbmcHttp?command=Restart() |
| RestartApp | Restarts XBMC | http://xbox/xbmcCmds/xbmcHttp?command=RestartApp() |
| Rotate | Rotates the currently displayed image by 90 degree clockwise. | http://xbox/xbmcCmds/xbmcHttp?command=Rotate() |
| SendKey(buttoncode;[LeftTrigger];[RightTrigger];[LeftThumbX];[LeftThumbY] ;[RightThumbX];[RightThumbY]) | Initiates a button, key or mouse event. Buttoncode specifies the type of event and the other parameters specify additional information that is specific to each buttoncode value. See key.h for the the list of keycodes. The example raises the A button event.
|
http://xbox/xbmcCmds/xbmcHttp?command=SendKey(256) |
| ShowPicture(filename) | Displays the image filename. | http://xbox/xbmcCmds/xbmcHttp?command=ShowPicture(F:\apps\xbmc\media\splash.png) |
| Shutdown | Shutdown XBOX | http://xbox/xbmcCmds/xbmcHttp?command=Shutdown() |
| SpinDownHardDisk | If possible stops the hard disk (saves power / quieter) | http://xbox/xbmcCmds/xbmcHttp?command=SpinDownHardDisk() |
| Stop | Stops the currently playing media. | http://xbox/xbmcCmds/xbmcHttp?command=Stop() |
| TakeScreenshot([filename];[flash];[rotation];[width];[height];[quality];[download];[imgtag]) | Captures the current contents of the Xbox screen.
If no parameters then the action is the same as initiating a regular screenshot command with the image being saved in the screenshot directory. If filename is provided then the image is saved to filename. If flash=True the screen will flash as the command executes. If resolution, width, height and quality are given then those values are used to define the rotation (in degrees), resolution and jpeg quality of the saved image. If download = True then the image is downloaded to the client as a base64 encoded stream. The command must conform to one of: No parameters Filename, flash, rotation, width, height, quality Filename, flash, rotation, width, height, quality, download Filename, flash, rotation, width, height, quality, download, imgtag NEW: imgtag is new it will put a Convert Base64 to image tag with the Base64 code so in firefox browsers it will show the image instead of the Base64 code. |
http://xbox/xbmcCmds/xbmcHttp?command=takescreenshot(test.jpg;true;0;300;200;90;true;imgtag) |
| Zoom(magnification) | Zooms the currently displayed image to a level specified by magnifaction. A magnification of 0 is the standard zoom level of none. Magnification can take values up to 8. | http://xbox/xbmcCmds/xbmcHttp?command=Zoom(4) |
File Commands
| Command | Information | Example |
| FileCopy(sourceFilename, destinationFilename) | Copies the Xbox file sourceFilename to the Xbox file desitinationFilename. | http://xbox/xbmcCmds/xbmcHttp?command=FileCopy(F:\apps\xbmc\media\splash.png;E:\pictures\) |
| FileDelete(filename) | Deletes the Xbox file filename. | http://xbox/xbmcCmds/xbmcHttp?command=FileDelete(F:\pictures\kim-smith-1024x768–22677.jpg) |
| FileDownload(filename;[bare]) | Download a file specified by filename from the Xbox to the client as a base64 stream. If the optional parameter 'bare' is specified the webheader and webfooter won't be included which results in just a raw base64 stream. | http://xbox/xbmcCmds/xbmcHttp?command=FileDownload(F:\apps\xbmc\default.xbe) |
| FileDownloadFromInternet(URL;[filename];[bare]) | Downloads the file with address URL to the client as a base64 encoded stream. If the filename parameter is present, the downloaded file is also saved on the Xbox as the file filename. If the optional parameter 'bare' is specified the webheader and webfooter won't be included which results in just a raw base64 stream. | http://xbox/xbmcCmds/xbmcHttp?command=FileDownloadFromInternet(http://wallpapers.skins.be/kim-smith/kim-smith-1024x768–22677.jpg;F:\pictures\kim-smith-1024x768–22677.jpg) To test quickly: http://xbox/xbmcCmds/xbmcHttp?command=ShowPicture(F:\pictures\kim-smith-1024x768–22677.jpg) |
| FileExists(filename) | Returns True if the Xbox file filename exists otherwise returns False. | http://xbox/xbmcCmds/xbmcHttp?command=FileExists(F:\pictures\kim-smith-1024x768–22677.jpg) |
| FileSize(filename) | Returns the file size of filename. | http://xbox/xbmcCmds/xbmcHttp?command=FileSize(F:\pictures\kim-smith-1024x768–22677.jpg) |
| FileUpload(filename, contents) | Uploads a file encoded as a base64 string contents to the file filename on the Xbox. The example creates on the xbox the file f:\test.txt with the contents hello. | http://xbox/xbmcCmds/xbmcHttp?command=fileUpload(f:\test.txt;aGVsbG8%3d) |
Miscellaneous commands
| Command | Information | Example |
| ChooseAlbum(URL) | Retrieves the cover image and review text of the album with URL URL as returned by the LookupAlbum command. The URL must be encoded using the standard %xx format(RFC1738) before being passed to the API. The example here is passing the URL http://www.allmusic.com/cg/amg.dll?p=amg&sql=10:7vz1z87a6yvn | http://xbox/xbmcCmds/xbmcHttp?command=choosealbum(http%3a%2f%2fwww%2eallmusic%2ecom%2fcg%2famg%2edll%3fp%3damg%26sql%3d10%3a7r6cmpea9f8o) |
| LookupAlbum(album[;artist;boolRelevance]) |
Looks up the album with name album on an Internet music site and returns the resulting matches as a list with the format: album_name<@@>album_URL If boolRelevance has a value of 1 a relevance score (ranging from 1 (perfect) to 0) will also be returned with the following format: album_name<@@>album_URL<@@@>score When requesting releveance scores it is best to include a value for the artist but it is not necessary. |
http://xbox/xbmcCmds/xbmcHttp?command=lookupalbum(On%20an%20Island)
http://xbox/xbmcCmds/xbmcHttp?command=lookupalbum(On%20an%20Island;david%20gilmour;1) |
| Config(command; parameters) | Provides access to the ASP configuration commands. command is the ASP command and parameters is a semi-colon separated list of parameters to accompany the command. command is one of bookmarksize, getbookmark, addbookmark, savebookmark, removebookmark. For further information see: XBMCConfiguration.cpp. Note that the WebServer must be running to use this command. [Since 10 Nov 2007 the WebServer does not need to be running] | http://xbox/xbmcCmds/xbmcHttp?command=Config(bookmarksize;20)
http://xbox/xbmcCmds/xbmcHttp?command=Config(getbookmark;music;name;1) http://xbox/xbmcCmds/xbmcHttp?command=Config(getbookmark;music;path;1) |
| WebServerStatus([status]) | If no parameter is provided the function returns the status of the WebServer (On or Off). Where a parameter is provided status must be either on (turns the WebServer on) or off (turns the WebServer off). Note that only Python scripts can use the version with the parameter. | http://xbox/xbmcCmds/xbmcHttp?command=WebServerStatus() |
| ExecBuiltIn(function) | Executes the XBMC ‘built-in’ function function. For the list of available functions see: List_of_Built_In_Functions OR ExecBuiltIn Functions | http://xbox/xbmcCmds/xbmcHttp?command=ExecBuiltIn(Notification(WARNING,SHUTTING%20DOWN%20SYSTEM!) |
| Help | Displays a list of some (NOT ALL) of the HTTPApi commands | http://xbox/xbmcCmds/xbmcHttp?command=Help() |
| SetResponseFormat(format; value) | Sets the format of the response from HTTPApi. Format takes one of the following:
WebHeader – if True then the default web server header will be prepended to the response (ignored for Python and ASP responses). WebFooter – if True then the default web server footer will be appended (ignored for Python and ASP responses). Header – A user definable string that will be added after the WebHeader (if present) and before the main body of the response. Footer – A user definable string that will be before after the WebFooter (if present) and after the main body of the response. OpenTag – A user definable string that will be inserted before each element of the main response. CloseTag – A user definable string that will be inserted after each element of the main response. Whether to insert this tag after the final element is defined by the CloseFinalTag setting. CloseFinalTag – if True then the final element will have a closing tag.
WebHeader=True WebFooter=True Header=”” Footer=”” OpenTag=”<li>” CloseTag=[carriage return] CloseFinalTag=False
OpenRecordSet=”” CloseRecordSet=”” OpenRecord=”” CloseRecord=”” OpenField=”<li>” CloseField=”” It is now possible to specify multiple formats in a single call to SetResponseFormat. SetResponseFormat without any parameters returns the formatting to the default values (as would restarting xbmc). |
http://xbox/xbmcCmds/xbmcHttp?command=SetResponseFormat(WebHeader;False)
The following sets up an XML formatted response (if viewing the output in a browser you will neeed to use the view source command to see the xml tags). http://xbox/xbmcCmds/xbmcHttp?command=setresponseformat(webheader;false;webfooter;false;header;<xml>;footer;</xml>;opentag;<tag>;closetag;</tag>;closefinaltag;true) Then the same for the QueryMusicDatabase response: http://xbox/xbmcCmds/xbmcHttp?command=setresponseformat(openRecordSet;<recordset>;closeRecordSet;</recordset>;openRecord;<record>;closeRecord;</record>;openField;<field>;closeField;</field>) Now set everything back to the default: |
| getXBETitle(path) | Return the Title/Description of the specifed XBE | http://xbox/xbmcCmds/xbmcHttp?command=getxbetitle(Q:\default.xbe) |
| getXBEid(path) | [Returns the id of a specifed XBE | http://xbox/xbmcCmds/xbmcHttp?command=getxbeid(Q:\default.xbe) |
Broadcast Commands
| Command | Information | Example |
| Broadcast(message;port) | Not sure if there is much point to this command - probably could be used to test a client listening for broadcasts. If the port parameter is not specified then the currently set default port will be used. | http://xbox/xbmcCmds/xbmcHttp?command=Broadcast(hello_from_xbmc) |
| SetBroadcast(level;port) | Sets the brodcast level and port. Level currently only takes three values: 0 - no broadcasts, 1 - media playback and startup & shutdown events, 2 - "OnAction" events (e.g. buttons) as well as level 1 events. Port is optional and if specified sets the default broadcast port value. | http://xbox/xbmcCmds/xbmcHttp?command=SetBroadcast(1) |
| GetBroadcast() | Returns the current level and port settings. | http://xbox/xbmcCmds/xbmcHttp?command=GetBroadcast() |
Name Changes
To make the names of the commands more logical some have been changed. The old names are still recognised but it is strongly advised that the new names are now used.
| Old Name | New Name |
| CopyFile | FileCopy |
| DeleteFile | FileDelete |
| GetInternetFile | FileDownloadFromInternet |
| GetThumb | FileDownload |
| GUISetting | SetGUISetting, GetGUISetting |
| SetFile | FileUpload |
| SetKey | SendKey |