Raspberry Pi: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 25: | Line 25: | ||
*[http://www.youtube.com/watch?v=4NR57ELY28s Video of XBMC running on Raspberry Pi] | *[http://www.youtube.com/watch?v=4NR57ELY28s Video of XBMC running on Raspberry Pi] | ||
*[[forum:113824|XBMC.org forum thread on RPi]] | *[[forum:113824|XBMC.org forum thread on RPi]] | ||
*[[Raspbmc]] - XBMC-centric linux-based OS install | |||
*[[OpenELEC]] - XBMC-centric linux-based OS install | |||
{{YouTube|4NR57ELY28s}} | {{YouTube|4NR57ELY28s}} | ||
Revision as of 06:58, 5 March 2012
The Raspberry Pi is a single-board computer developed in the UK by the Raspberry Pi Foundation.
The design is based around a Broadcom BCM2835 SoC, which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 256 MB of RAM. The design does not include internal memory, instead relying on an SD card for booting and long-term storage.
XBMC for Raspberry Pi
Team-XBMC developers are working on porting XBMC to the Raspberry Pi using beta boards supplied by the RPi Foundation.
- Raspberrypi.org- XBMC running on Raspberry Pi
- Video of XBMC running on Raspberry Pi
- XBMC.org forum thread on RPi
- Raspbmc - XBMC-centric linux-based OS install
- OpenELEC - XBMC-centric linux-based OS install
Specifications
Model A | Model B | |
---|---|---|
Target price: | USD $25 (GBP £16) | USD $35 (GBP £22) |
SoC: | Broadcom BCM2835 (CPU + GPU + DSP + SDRAM) | |
CPU: | 700 MHz ARM1176JZF-S core (ARM11 family) | |
GPU: | Broadcom VideoCore IV, OpenGL ES 2.0, 1080p30 h.264/MPEG-4 AVC high-profile decode | |
Memory (SDRAM): | 256 MB | |
USB 2.0 ports: | 1 | 2 (via integrated USB hub) |
Video outputs: | Composite RCA, HDMI | |
Audio outputs: | 3.5 mm jack, HDMI | |
Onboard storage: | SD / MMC / SDIO card slot | |
Onboard network: | None | 10/100 Ethernet |
Low-level peripherals: | 8 x GPIO, UART, I²C bus, SPI bus with two chip selects, +3.3 V, +5 V, Ground (GPIO connector is not assembled on the board, see below for details) | |
Power ratings: | 500 mA (2.5 W) | 700 mA (3.5 W) |
Power source: | 5 volt via MicroUSB or optional GPIO header | |
Size: | 85.60 × 53.98 mm (3.370 × 2.125 in) | |
Supported operating systems: | Raspbmc, OpenELEC, Debian GNU/Linux, Fedora, Arch Linux |
- Notes
- The 26-pin GPIO connector is not assembled on the board. The end-user must purchase and solder a 13x2 pin header with 0.1-inch (2.54mm) spacing. The pin header can be either a straight pin header, mounted on either the bottom or the top, (to connect to a "daughterboard") or it can be a right-angle shrouded box connector for use with a ribbon cable.
- Though the Model A doesn't have an RJ45 Ethernet port, it can connect to a network by using a user supplied USB Ethernet or Wi-Fi adapter. Generic USB keyboards and mice are compatible with the Raspberry Pi.