Raspberry Pi: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 8: | Line 8: | ||
| XBMC = pre-v12 (planned) | | XBMC = pre-v12 (planned) | ||
| cpu = ARM1176JZF-S 700 MHz | | cpu = ARM1176JZF-S 700 MHz | ||
| storage = | | storage = SD card slot | ||
| memory = 256 MB | | memory = 256 MB | ||
| connectivity = USB 2, composite video, HDMI, SD card slot, 3.5 mm audio, 10/100 ethernet<ref name="ethernet" />, GPIO<ref name="GPIO" /> | | connectivity = USB 2, composite video, HDMI, SD card slot, 3.5 mm audio, 10/100 ethernet<ref name="ethernet" />, GPIO<ref name="GPIO" /> |
Revision as of 05:53, 19 March 2012
The Raspberry Pi is a single-board computer developed in the UK by the Raspberry Pi Foundation.
The design is based around a Broadcom BCM2835 SoC, which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 256 MB of RAM. The design does not include internal memory, instead relying on an SD card for booting and long-term storage.
XBMC for Raspberry Pi
Team-XBMC developers are working on porting XBMC to the Raspberry Pi using beta boards supplied by the RPi Foundation.
- Raspberrypi.org- XBMC running on Raspberry Pi
- Video of XBMC running on Raspberry Pi
- XBMC.org forum thread on RPi
- Raspbmc - XBMC-centric linux-based OS install
- OpenELEC - XBMC-centric linux-based OS install
Specifications
Model A | Model B | |
---|---|---|
Target price: | USD $25 (GBP £16) | USD $35 (GBP £22) |
SoC: | Broadcom BCM2835 (CPU + GPU + DSP + SDRAM) | |
CPU: | 700 MHz ARM1176JZF-S core (ARM11 family) | |
GPU: | Broadcom VideoCore IV, OpenGL ES 2.0, 1080p30 h.264/MPEG-4 AVC high-profile decode | |
Memory (SDRAM): | 256 MB | |
USB 2.0 ports: | 1 | 2 (via integrated USB hub) |
Video outputs: | Composite RCA, HDMI | |
Audio outputs: | 3.5 mm jack, HDMI | |
Onboard storage: | SD / MMC / SDIO card slot | |
Onboard network: | None[1] | 10/100 Ethernet |
Low-level peripherals: | 8 x GPIO[2], UART, I²C bus, SPI bus with two chip selects, +3.3 V, +5 V, Ground | |
Power ratings: | 500 mA (2.5 W) | 700 mA (3.5 W) |
Power source: | 5 volt via MicroUSB or optional GPIO header[2] | |
Size: | 85.60 × 53.98 mm (3.370 × 2.125 in) | |
Supported operating systems: | Raspbmc, OpenELEC, Debian GNU/Linux, Fedora, Arch Linux |
- Notes
- ↑ Though the Model A doesn't have an RJ45 Ethernet port, it can connect to a network by using a user supplied USB Ethernet or Wi-Fi adapter.
- ↑ 2.0 2.1 The 26-pin GPIO connector is not assembled on the board. The end-user must purchase and solder a 13x2 pin header with 0.1-inch (2.54mm) spacing. The pin header can be either a straight pin header, mounted on either the bottom or the top, (to connect to a "daughterboard") or it can be a right-angle shrouded box connector for use with a ribbon cable.