Archive:Wire your XBOX DVD-Remote for USB: Difference between revisions

Revision as of 07:46, 20 September 2011

Redirect to:

@@ Line 1: / Line 1: @@
-Follow this simple procedure:
+#REDIRECT [[How-to:Wire your XBOX DVD-Remote for USB#Lirc Config]]
-# Open the receiver's plastic case using a small screw driver. Carefully pry around the case.
-# Solder the wire to the receiver using the picture below
-* Note: This might damage the casing of the dongle.
-== Color Coded Pinout ==
-[[File:Xbox-dvd-pinout_thumb.jpg|link=http://wiki.xbmc.org/images/0/01/Xbox-dvd-pinout.jpg]]<br />
-* If you're using a standard USB cable you should just be able to match the colors and solder away, but to be sure check your cable with a continuity tester according to the USB spec provided [http://pinouts.ru/Slots/USB_pinout.shtml here].
-# Red = Positive Power (+5V DC)
-# White = Data -
-# Green = Data +
-# Yellow = Unused
-# Black = Ground (0V DC)
-{{:Lirc Config for Xbox DVD Remote}}
-== XERC ==
-The [http://shop.sickmods.net/product/XERC_2_XE/ Sickmods XERC 2 XE] works really well with an HTPC and the Xbox DVD dongle. It handles power-off and power-on via your remote. [http://forum.xbmc.org/showthread.php?t=64328 Here are some installation instructions for that.]
-[[Category:How-to]]
-[[Category:Remote]]