Toggles debug log on / off. Useful for troubleshooting.
Shutdown Idle Timeout
Will cause XBMC to automatically power off the Xbox after a specified amount time of non-use.
Front LED Colour
Controls the colour of the front LED on your Xbox eject button. The available options are Off, Green, Orange, Leave as Is and Cycle (the system will cycle through the colours).
Switch LED off on Playback
Causes the system to automatically shut off the front LED when certain Media is played back.
Switch LED back on if paused
This option turns LED back on when in pause mode, if previous option is turned on
The available options are:
No
Music Only
Video Only
Music & Video
Note: If you have set the Front LED Color to "OFF", then also your LCD-Display will be turned off!
Fan Speed Override
Allows you to manually set the Xbox fan speed from 10% to 100%, allowing your system to run more quietly. Be carefull not to set it too low or it could cause overheating of the Xbox. The fan will restore to the default speed (set in your bios) when starting another application or games.
Auto Temperature Control
When enabled XBMC will try to keep the temperature of the Xbox around the target temperature you set. If your Xbox is cooler than the set temperature the fan will gradually slow down until that temperature is reached. If the temperature gets higher then the fan speed will increase trying to keep it around the set temperature. The fan will restore to the default speed (set in your BIOS) when starting another application or games.
Target Temperature
This is where you specify the desired temperature for Auto Temperature Control.
The type of LCD display installed in your Xbox. If you set the wrong LCD Display here it will result in the improper display of characters on your LCD!
Modchip
The type of Modchip installed in your system. Currently, XBMC offers LCD support for SMARTXX, Xecuter3 and Xenium
Backlight
Adjusts the brightness of the LCD backlight
Contrast
Adjusts the contrast of your LCD display
Dim LCD on Playback
Dim LCD on Paused
For more information on customizing the information displayed on your LCD, see:
Causes XBMC to automatically launch content from media inserted in the DVD Drive. The available options are:
Autorun DVD-Video
Autorun VCD/SVCD
Autorun Audio-CD
Autorun Xbox Games
Autorun Video
Autorun Music
Autorun Pictures
All options are turned on by default.
Cache
Allows you to control the amount of information that is cached in the system's memory when playing specific types of media from different locations. Do not set these values too high, as they will consume too many system resources and adversely affect playback.
The cache settings are divided into types and locations so those two pieces of information determine what cache is used.
The types are:
DVD's (including ISO's and VIDEO_TS.IFO files)
all other Video files
Audio files
The locations are:
Hard Disk and DVDROM are the local Xbox hard disk and DVDROM drives.
Internet applies to http, https, shout, mms, http, rtsp, rtp, udp, lastfm
Local network is for the remaining protocols (smb, xbms, ftp, etc.) and where an Internet option is not available.
The Internet - Unknown cache is special. It's only used when Xbmc cannot determine if the stream is video or audio.
Audio Hardware
Audio Output
Allows you to select between Analog and Digital audio output. Note that in order to use digital output, your Xbox needs to be connected to a compatible receiver and a supported AV pack.
AC3 Capable Receiver
Select this option if your receiver is capable of decoding AC3 streams.
DTS Capable Receiver
Select this option if your receiver is capable of decoding DTS streams.
Video Hardware
Video Aspect
Allows you to select between 4:3 and 16:9 aspect ratio.
Enable 480p
Enable 780p
Enable 1080i
Master Lock
NOTE: The Master Lock options are ONLY available while using the Default User profile!!
