Settings/System

Video output

Display Mode Display xbmc in a window, or fullscreen on the selected screen. Display Changes the resolution that the User Interface is displayed in. Use a fullscreen window rather than true fullscreen Windows only when active, do not use the DirectX fullscreen mode. The main benefit is for multi-screen configurations, where xbmc can be used at the same time as other applications without automatically minimizing. Uses a bit more resources and playback may be slightly less smooth. Blank other displays In a multi-screen configuration, the screens where xbmc is not displayed are blacked out. Vertical blank sync ? Video calibration... See #Video calibration... Test patterns Test patterns for display hardware calibration

Video calibration...

This screen allows you to calibrate the User Interface by adjusting the overscan. Use this tool if the image being displayed is too large or small for your display. Note: Always adjust your hardware display settings before XBMC's settings (such as overscan, etc). Simply adjust the screen so that the arrows are in the top left and bottom right corners and that the entire frame is visible on screen.

It offers the ability to adjust

• The overscan of the video - How close to the edges of the screen that the image is displayed
• The positition where subtitles are displayed
• The position of the on screen display
• The pixel ratio - allows you calibrate the aspect ratio at which videos are played back

• 

  Upper left corner

• Uicalibration2.jpg

  Lower right corner

• Uicalibration3.jpg

  Subtitles position

• Uicalibration.jpg

  Aspect ratio

Audio output

Audio output Allows you to tell xbmc about the type of connection to the audio equipment. Optical/Coax and HDMI enable the passthrough of Dolby Digital and DTS to capable receivers. Speaker Configuration select your physical speaker layout Boost volume level on downmix Boosts AC3 streams that have been mixed-down to 2 channels - Dolby Digital (AC3) capable receiver Select this option if your receiver is capable of decoding AC3 streams. - DTS Capable Receiver Select this option if your receiver is capable of decoding DTS streams. Audio output device device you use to play PCM or decoded audio such as mp3's and FLAC

Input devices

Note: The content of this screen largely depends on the input devices that XBMC detects

Remote control sends keyboard presses When activated, your keyboard arrows will move the selection on the virtual keyboard. When desactivated, they will move the cursor from your text. Enable mouse and Touch Screen support If deactivated, XBMC will ignore all mouse movements and clicks.

Power saving

Put display to sleep when idle ? Shutdown function timer ? Shutdown function ?

Debugging

Enable Debug Logging Toggles debug log on / off. Useful for troubleshooting. Screenshot folder Folder used to save screenshots taken within XBMC.

Master lock

See also: Media sources#Locking

NOTE: The Master Lock options are ONLY available while using the Default User profile

XBMC will give you three tries when you need to enter a lock/password to access something that is locked. If you max out these three tries then just quit XBMC and re-open it to get three more tries. The Master Lock code is stored in the "profiles.xml" file in the userdata folder. Should you get locked out, you can delete or edit the "profiles.xml" file.

Master lock code and settings Opens the Master Lock dialog, where you can configure your Master Lock options. Ask For Master Lock Code on Startup If enabled, the master lock code is required to unlock XBMC on startup

Master lock settings

Master Lock Allows you to set the master lock password. Can be one of three types: Numeric Password - Enter a Numeric Password using the On Screen Keyboard Gamepag Button Combo - Enter a series of buttons using the Gamepad Full-Text Password - Enter a plain-text password using the On Screen Keyboard With the Master Lock, you can restrict access to the following sections when selected: Lock Music Section Lock Video Section Lock Pictures Section Lock Programs and Scripts Section Lock File Manager Lock Settings