Talk:Main Page

Typo in second paragraph

There is a typo in the second paragraph on the main page:

To edit the XBMC Wiki just register for an account. Page creation and editing of certain pages requires an account that is a few days old and has made a hand full of edits.

Should be

To edit the XBMC Wiki just register for an account. Page creation and editing of certain pages requires an account that is a few days old and has made a handful of edits.

Reference: [1]

--AaronTC 13:19, 5 November 2011 (EDT)

Whoops. Done. Most of the pages are directly editable, so if you see any other typos you should be able to access them directly. Cheers. -- Ned Scott 19:45, 5 November 2011 (EDT)

Hi Guys, How do I add this page to the HOWTO section? It took me about a year to figure this out and I think it could be a valuable contribution to the XBMC Manual. Kind Regards Cyber7 03:27, 3 January 2012 (EST)

HOWTO: Install XBMC on a Moneual Labs MonCaso 312 HTPC case

Hi Guys

Over the last couple of days I have re-built my mono 312 and the following steps get you going on XBMC:

Installed XBMC FRESH and ran the following commands:

 apt-get update
 wget http://ftp.de.debian.org/debian/pool/main/l/lirc/lirc_0.9.0~pre1.orig.tar.bz2
 tar -jxvf lirc_0.9.0~pre1.orig.tar.bz2
 apt-get install libtool automake autoconf dialog
 cd lirc-0.9.0-pre1/
 ./configure --with-driver=mplay2
 make && make install

Changed the paths in /etc/init.d/lirc (from /usr/ to /usr/local/)

 vi /etc/init.d/lirc
 :1,$ s/\/usr\//\/usr\/local\//g

Changed /etc/lirc/hardware.conf to have ONLY:

 REMOTE_DRIVER="mplay2"
 REMOTE_DEVICE="/dev/ttyUSB0"

Edit the file /etc/lirc/lircd.conf as follow :

begin remote
 name  Moncaso_312
 bits            8
 eps            30
 aeps          100
 one             0     0
 zero            0     0
 gap          107899
 toggle_bit_mask 0x0
     begin codes
         PwrOff                   0x41
         PwrOn                    0x55
         Hotkey                   0x5A
         DVD                      0x14
         Menu                     0x5C
         Sleep                    0x58
         Rec                      0x11
         Play                     0x09
         Eject                    0x5E
         Rew                      0x0D
         Pause                    0x05
         FF                       0x15
         Prev                     0x1A
         Stop                     0x01
         Next                     0x1E
         Full_Screen              0x0C
         Ratio                    0x10
         Task_Switcher            0x17
         Movie                    0x40
         Music                    0x56
         Photo                    0x45
         TV                       0x46
         OK                       0x42
         Up                       0x19
         Left                     0x54
         Right                    0x43
         Down                     0x1D
         Back                     0x0B
         Exit                     0x1F
         Mute                     0x4A
         More                     0x4B
         Open                     0x04
         Vol+                     0x0A
         Vol-                     0x0E
         CH+                      0x12
         CH-                      0x16
         1                        0x4D
         2                        0x4E
         3                        0x4F
         4                        0x50
         5                        0x51
         6                        0x52
         7                        0x53
         8                        0x03
         9                        0x07
         0                        0x4C
         Quick_Guide              0x08
         Timer                    0x18
     end codes
 end remote

I then rebooted the machine and open a ssh console and run irw, I get the keystrokes! yahoo!!! at this stage!!!

Added the following keymap to the /usr/share/xbmc/system/Lircmap.xml file and WALLA - everything works.

 <remote device="Moncaso_312">
       <play>Play</play>
       <pause>Pause</pause>
       <stop>Stop</stop>
       <forward>FF</forward>
       <reverse>Rew</reverse>
       <left>Left</left>
       <right>Right</right>
       <up>Up</up>
       <down>Down</down>
       <select>OK</select>
       <pageplus>Ch+</pageplus>
       <pageminus>Ch-</pageminus>
       <back>Back</back>
       <menu>Menu</menu>
       <title>Hotkey</title>
       <info>More</info>
       <skipplus>Next</skipplus>
       <skipminus>Prev</skipminus>
       <display>Aspect</display>
       <start>Home</start>
       <record>Record</record>
       <volumeplus>Vol+</volumeplus>
       <volumeminus>Vol-</volumeminus>
       <mute>Mute</mute>
       <power>PwrOn</power>
       <myvideo>Movie</myvideo>
       <mymusic>Music</mymusic>
       <mypictures>Photo</mypictures>
       <mytv>TV</mytv>
       <one>1</one>
       <two>2</two>
       <three>3</three>
       <four>4</four>
       <five>5</five>
       <six>6</six>
       <seven>7</seven>
       <eight>8</eight>
       <nine>9</nine>
       <zero>0</zero>
       <obc5e>Eject</obc5e>
 </remote>

Thank you everyone and you can use these instructions. They work 100%! Cyber7 02:39, 3 January 2012 (EST)

1. Tourist Visa • 1 month single entry and 1 month multiple entry. • Maximum stay of one month and can be extended after your arrival in Vietnam.

2. Diplomatic and official Visas

• No fees applied unless otherwise agreed upon between Vietnam and applicant’ s country. • On applying this visa, an official letter by the concerned agencies of local government, foreign embassies or consulates accredited to the applicant’s country, international organizations, or other accredited organizations based in that country must be submitted.

3. Business or other types of Visa

• it is required to get an approval from sponsors in Vietnam when applying for this category. • Multiple entry and stay of 3 month or 6 month is possible.

Talk:Main Page

Typo in second paragraph

HOWTO: Install XBMC on a Moneual Labs MonCaso 312 HTPC case

Navigation menu

Search