Talk:AudioEngine

I felt the AudioEngine page was getting far too long and complicated so I've devided the information.

This page will be for background information on AudioEngine

I've moved all GUI stuff and configuration information on a new page AudioEngine/HOW-TO: Configure audio

This can be all deleted now to leave the discussion page clean

Audio Codec	Dolby Digital (DD/AC-3/ATSC/As52)	Dolby Digital Plus (DD+/E-AC-3)	DTS	DTS 24/96	Linear PCM (LPCM)	Dolby TrueHD	DTS-HD	DTS-HD MA
Description	Up to 5.1 discrete channels and up to 48 kHz surround sound.	Up to 7.1 channels surround sound and up to 48 kHz / 24 bit	Up to 5.1 channels and up to 48 kHz / 24-bit	Up to 5.1 channels at 96 kHz / 24 bit	Up to 8 channels up to 192 kHz / 24 bit	Up to 8 discrete channels at 96 kHz or up to 6 channels (5.1 surround) at 192 kHz / 24 bit	Up to 7.1 discrete channels and up to 96 kHz / 24-bit	Up to 7.1 discrete channels at 96 kHz and up to 5.1 channels at 192 kHz.
Player support	Mandatory	Optional	Mandatory	Optional	Mandatory	Optional
XBMC Passthrough Setting	Dolby Digital (AC3) capable receiver????		DTS capable receiver		Multichannel LPCM capable receiver	TrueHD capable receiver	DTS-HD capable receiver

Have to check if DTS-HD is intended to describe DTS-HD MA in AE simply because of [Linux] DTS-HD Master Audio forum thread it reports disabling DTS-HD passthough style="background: #90ff90; color: black; vertical-align: middle; text-align:center;" class="table-enabled"|Enableds DTS-HD MA, I cant test this becase I dont have HD audio receiver. --uNiversal 12:12, 1 February 2013 (EST)

--jjd-uk 11:46, 4 February 2013 (GMT): note to uNiversal - AE DTS-HD setting covers both DTS-HD & DTS-HD MA.

Yes I know it does but DTS-HD MA is the format 100% supported DDDamina hinted that DTS-HD mileage may vary which to me says something else. But ok the setting in XBMC is not called DTS-HD MA in any case.--uNiversal 05:29, 5 February 2013 (EST)

???? Need to confirm which setting covers Dolby Digital Plus, thinks it's the Dolby Digital (AC3) capable receiver setting but not 100% perhaps need Damian to confirm.

Idk I know format is not style="background: #90ff90; color: black; vertical-align: middle; text-align:center;" class="table-enabled"|Enabledd in AE ATM DD+ that is, but yes Which setting style="background: #90ff90; color: black; vertical-align: middle; text-align:center;" class="table-enabled"|Enableds that will probably (guessing) be AC-3 since DTS 24/96 is probably DTS setting, idk omg what a mess.--uNiversal 05:29, 5 February 2013 (EST) DD+ support is in AE it's just not working for passthrough, AE will decode DD+ using ffmpeg to LPCM