Archive:Automatic lirc resume script
| THIS PAGE IS OUTDATED:
This page or section has not been updated in a long time, no longer applies, refers to features that have been replaced/removed, and/or may not be reliable.
This page is only kept for historical reasons, or in case someone wants to try updating it.
This guide assumes that you have installed XBMC Live or have at least performed all steps outlined in one of the articles listed here Installing XBMC for Linux and here HOW-TO setup Lirc to talk to XBMC. This guide assumes that your remote works well upon startup. If it does not, then do not proceed with this article.
To enable resume from your remote see the following article Enable Wake-On-Device
You will need root access for the following commands.
Creating a resume file
- Using your SFTP client create a file called /etc/pm/sleep.d/99lirc-resume.sh
- copy the following information into the file 99lirc-resume.sh
#!/bin/sh # This script uses curl. Install curl using the following command from your terminal apt-get install curl # This script will restart lirc drivers, Lirc, and XBMC's lirc interperater upon resume. case "$1" in resume) lircDriver=$(dmesg | grep usbcore | grep -i 'lirc' | sed -e "s/.* \(lirc*\)/\1/" | head -n 1) curl "http://127.0.0.1:8080/xbmcCmds/xbmcHttp?command=ExecBuiltIn¶meter=LIRC.Stop" /etc/init.d/lirc stop rmmod $lircDriver modprobe $lircDriver /etc/init.d/lirc start #remove the comment if the computer automatically sleeps after resume #irw & sleep 1; killall irw curl "http://127.0.0.1:8080/xbmcCmds/xbmcHttp?command=ExecBuiltIn¶meter=LIRC.Start" echo "lirc resume script completed!!!" >>/tmp/script.log ;; esac
note: the #irw line ports the resident memory command to irw, then kills irw. This is useful on the Snapstream devices.
- make it executable using the following command in your terminal
chmod +x /etc/pm/sleep.d/99lirc-resume.sh
- Get curl by typing the following
sudo apt-get install curl
You are now done.