Archive:SolidRun CuBox-i: Difference between revisions
(→Ports) |
(→Ports) |
||
Line 192: | Line 192: | ||
# HDMI port | # HDMI port | ||
# Micro SD card slot | # Micro SD card slot | ||
: {{small| {{note| Install the micro-SD card so that the contacts face UP (towards the HDMI port). To ensure contact, the card must be fully inserted, with no portion extending beyond the edge of the CuBox. }} }} | #: {{small| {{note| Install the micro-SD card so that the contacts face UP (towards the HDMI port). To ensure contact, the card must be fully inserted, with no portion extending beyond the edge of the CuBox. }} }} | ||
# Upper USB port | # Upper USB port | ||
# Lower USB port | # Lower USB port |
Revision as of 08:01, 19 April 2015
Devices | Freescale | Android Linux |
SolidRun CuBox-i |
CuBox-i series (which includes CuBoxTV) is SolidRun's second-generation family of multi-purpose ARM-based mini-computers that is capable of running either Kodi on Android or on Linux, both using firmware images provided by SolidRun development team and third-parties of which many comes with Kodi pre-installed.
With its hardware built around SolidRun MicroSOM platform the CuBox-i series uses scalable and open source friendly Freescale i.MX6 family of SoC (System-on-Chip) ranging from a single to quad ARM Cortex-A9 processor cores, 2D/3D hardware graphics processing unit, video decoding and encoding acceleration hardware, and HDMI 1.4 1080p 3D output support.
Installing Kodi
Linux
The easiest way to use Kodi on a CuBox-i is to just install a Kodi-specific OS to your mSD card with one of the following OS's. The CuBox-i will boot directly up into Kodi and nearly every setting can be easily configured within the Kodi GUI
Android
Kodi can also be installed onto a CuBox-i that is running Android using the normal Android instructions.
Detailed hardware specification
CuBox-i family comparison table
Click "Expand" to see comparison table ---> | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Notes:
|
Ports
The front is not shown on the image. The LED and infrared receiver/transmitter are all behind the plastic window on the lower right.
|
|
Physical Dimensions
- Approximately: 55mm x 55mm x 42mm (2.17 x 2.17 x 1.65 inches)
- Weight: Depends on the model being used