Official Kodi Wiki - User contributions [en]

Archive:EzeeCube

2015-07-16T09:00:45Z

Al 124:

{{mininav|[[Devices]]|[[ARM Hardware]]}}
{{device notice}}

{{Infobox information appliance
| name = EzeeCube
| image = [[File:EZ1.jpg|300px]]
| cpu = Freescale iMX6 Cortex A9 Quad Core 1.0 Ghz (MCIMX6D5EYM10AD) 
| graphics = Vivante GC2000 
| os = Custom Yocto Linux
| memory = 2GB DDR3 64bits 1066Mhz
| storage = eMMC 4GB flash <br/> 1 Terabyte, 5400RPM, 2.5" 
| connectivity = HDMI 1.4<br/> 1Gbit Ethernet  <br/> IEEE 802.11 2.4Ghz WiFi   <br/> USB2.0
}}
[[File:WM_EZEECUBE_MAIN_REAR_1_1.jpg|310px|EzeeCube Connectivity|thumb]]

<section begin="intro" />'''EzeeCube''' is an expandable smart media centre developed and sold by Ezee Systems Limited. It supports cross platform connectivity between iOS, Android, Mac and Windows devices. It stores photos and media content from up to 6 devices. All content can be accessed from the connected HDTV and any paired devices. EzeeCube comes with a customised version of Kodi pre-installed and pre-configured. Media content can be synced using the EzeeSync app for iOS/Android devices or Mac/Windows.

EzeeCube was crowdfunded via Indiegogo in June 2014, and reached 196% of its target. The campaign included the EzeeCube base unit, add-on storage, and an add-on blu-ray player. EzeeCube started shipping in June 2015. <section end="intro" />

<br/>

== '''Features''' ==
EzeeCube comes with a 1TB or 2TB hard disk. It is expandable using the patent-pending Stack-To-Extend technology. EzeeCube also makes an add-on storage stack and a blu-ray player stack which can be purchased separately. Both these add-ons require no wires or setup.

It is an HDMI compliant device that connects to a HD television through the HDMI port. It can be controlled either by the IR remote control that comes with the EzeeCube base unit or any CEC remote control.

EzeeCube comes with Personal Video Recording (PVR) head-end pre-configured for watching and recording off the TV programming. It also supports hardware de-interlacing of the frames.

[[File:Ezee_remote1.png|500px]]

== '''Connectivity and Ports'''==
EzeeCube supports Gigabit Ethernet and can be connected to a home network via wifi or ethernet cable. iOS, Android, Mac or Windows devices on the same network can pair with EzeeCube to sync content from these devices automatically. EzeeCube can boot in USB mode to flash custom firmware via USB OTG port in the back. It also has an SD card reader, optical audio port for audio passthrough and a USB 2.0 port.

== '''Stacking Specs''' ==
There are total of 6 pins exposed on the top and bottom of the base EzeeCube unit as well as stackable accessories. Stacks can be placed on top or below the base unit. Data and control transfer between the base unit and the stacks is via USB 2.0. A 12V5A power supply is provided on other pins.

[[File:main.1156 copy.png|400px]]

== '''Pre-Installed Packages''' ==
'''Customised Kodi''' - EzeeCube is based on Kodi’s official open source code and customised to automatically sync photos, videos and contacts from iOS/Android devices. It uses a new skin designed to work in 1080p.

'''OwnCloud server''' - EzeeCube comes with OwnCloud servers pre-installed and configured that stores media and documents files. They are accessible via OwnCloud cross platform client application, on your TV via Kodi or the EzeeSync app for iOS, Android, Mac and Windows.

'''FTP Server''' - EzeeCube comes with a FTP server pre-installed and configured which lets the user access and edit media content and files stored on EzeeCube. It works with all standard FTP client applications across platforms.

== '''Comparison of EzeeCube With Other Platforms''' ==

[[File:EzeeCube Comparison.png|600px]]

== '''Links''' ==
EzeeCube Official Product Website http://www.ezeecube.tv

EzeeCube Forum http://forum.ezeecube.tv

[[Category:HTPC]]
[[Category:Linux]]
[[Category:ARM]]
[[Category:Hardware]]
[[Category:Freescale]]

File:EzeeCube Comparison.png

2015-07-16T09:00:13Z

Al 124: MsUpload

MsUpload

Archive:EzeeCube

2015-07-16T08:57:09Z

Al 124:

{{mininav|[[Devices]]|[[ARM Hardware]]}}
{{device notice}}

{{Infobox information appliance
| name = EzeeCube
| image = [[File:EZ1.jpg|300px]]
| cpu = Freescale iMX6 Cortex A9 Quad Core 1.0 Ghz (MCIMX6D5EYM10AD) 
| graphics = Vivante GC2000 
| os = Custom Yocto Linux
| memory = 2GB DDR3 64bits 1066Mhz
| storage = eMMC 4GB flash <br/> 1 Terabyte, 5400RPM, 2.5" 
| connectivity = HDMI 1.4<br/> 1Gbit Ethernet  <br/> IEEE 802.11 2.4Ghz WiFi   <br/> USB2.0
}}
[[File:WM_EZEECUBE_MAIN_REAR_1_1.jpg|310px|EzeeCube Connectivity|thumb]]

<section begin="intro" />'''EzeeCube''' is an expandable smart media centre developed and sold by Ezee Systems Limited. It supports cross platform connectivity between iOS, Android, Mac and Windows devices. It stores photos and media content from up to 6 devices. All content can be accessed from the connected HDTV and any paired devices. EzeeCube comes with a customised version of Kodi pre-installed and pre-configured. Media content can be synced using the EzeeSync app for iOS/Android devices or Mac/Windows.

EzeeCube was crowdfunded via Indiegogo in June 2014, and reached 196% of its target. The campaign included the EzeeCube base unit, add-on storage, and an add-on blu-ray player. EzeeCube started shipping in June 2015. <section end="intro" />

<br/>

== '''Features''' ==
EzeeCube comes with a 1TB or 2TB hard disk. It is expandable using the patent-pending Stack-To-Extend technology. EzeeCube also makes an add-on storage stack and a blu-ray player stack which can be purchased separately. Both these add-ons require no wires or setup.

It is an HDMI compliant device that connects to a HD television through the HDMI port. It can be controlled either by the IR remote control that comes with the EzeeCube base unit or any CEC remote control.

EzeeCube comes with Personal Video Recording (PVR) head-end pre-configured for watching and recording off the TV programming. It also supports hardware de-interlacing of the frames.

[[File:Ezee_remote1.png|500px]]

== '''Connectivity and Ports'''==
EzeeCube supports Gigabit Ethernet and can be connected to a home network via wifi or ethernet cable. iOS, Android, Mac or Windows devices on the same network can pair with EzeeCube to sync content from these devices automatically. EzeeCube can boot in USB mode to flash custom firmware via USB OTG port in the back. It also has an SD card reader, optical audio port for audio passthrough and a USB 2.0 port.

== '''Stacking Specs''' ==
There are total of 6 pins exposed on the top and bottom of the base EzeeCube unit as well as stackable accessories. Stacks can be placed on top or below the base unit. Data and control transfer between the base unit and the stacks is via USB 2.0. A 12V5A power supply is provided on other pins.

[[File:main.1156 copy.png|400px]]

== '''Pre-Installed Packages''' ==
'''Customised Kodi''' - EzeeCube is based on Kodi’s official open source code and customised to automatically sync photos, videos and contacts from iOS/Android devices. It uses a new skin designed to work in 1080p.

'''OwnCloud server''' - EzeeCube comes with OwnCloud servers pre-installed and configured that stores media and documents files. They are accessible via OwnCloud cross platform client application, on your TV via Kodi or the EzeeSync app for iOS, Android, Mac and Windows.

'''FTP Server''' - EzeeCube comes with a FTP server pre-installed and configured which lets the user access and edit media content and files stored on EzeeCube. It works with all standard FTP client applications across platforms.

== '''Comparison of EzeeCube With Other Platforms''' ==

[[File:EzeeCube Comparison .png|600px]]

== '''Links''' ==
EzeeCube Official Product Website http://www.ezeecube.tv

EzeeCube Forum http://forum.ezeecube.tv

[[Category:HTPC]]
[[Category:Linux]]
[[Category:ARM]]
[[Category:Hardware]]
[[Category:Freescale]]

File:EzeeCube Comparison .png

2015-07-16T08:55:50Z

Al 124: MsUpload

MsUpload

Archive:EzeeCube

2015-07-16T05:06:42Z

Al 124:

{{mininav|[[Devices]]|[[ARM Hardware]]}}
{{device notice}}

{{Infobox information appliance
| name = EzeeCube
| image = [[File:EZ1.jpg|300px]]
| cpu = Freescale iMX6 Cortex A9 Quad Core 1.0 Ghz (MCIMX6D5EYM10AD) 
| graphics = Vivante GC2000 
| os = Custom Yocto Linux
| memory = 2GB DDR3 64bits 1066Mhz
| storage = eMMC 4GB flash <br/> 1 Terabyte, 5400RPM, 2.5" 
| connectivity = HDMI 1.4<br/> 1Gbit Ethernet  <br/> IEEE 802.11 2.4Ghz WiFi   <br/> USB2.0
}}
[[File:WM_EZEECUBE_MAIN_REAR_1_1.jpg|310px|EzeeCube Connectivity|thumb]]

<section begin="intro" />'''EzeeCube''' is an expandable smart media centre developed and sold by Ezee Systems Limited. It supports cross platform connectivity between iOS, Android, Mac and Windows devices. It stores photos and media content from up to 6 devices. All content can be accessed from the connected HDTV and any paired devices. EzeeCube comes with a customised version of Kodi pre-installed and pre-configured. Media content can be synced using the EzeeSync app for iOS/Android devices or Mac/Windows.

EzeeCube was crowdfunded via Indiegogo in June 2014, and reached 196% of its target. The campaign included the EzeeCube base unit, add-on storage, and an add-on blu-ray player. EzeeCube started shipping in June 2015. <section end="intro" />

<br/>

== '''Features''' ==
EzeeCube comes with a 1TB or 2TB hard disk. It is expandable using the patent-pending Stack-To-Extend technology. EzeeCube also makes an add-on storage stack and a blu-ray player stack which can be purchased separately. Both these add-ons require no wires or setup.

It is an HDMI compliant device that connects to a HD television through the HDMI port. It can be controlled either by the IR remote control that comes with the EzeeCube base unit or any CEC remote control.

EzeeCube comes with Personal Video Recording (PVR) head-end pre-configured for watching and recording off the TV programming. It also supports hardware de-interlacing of the frames.

[[File:Ezee_remote1.png|500px]]

== '''Connectivity and Ports'''==
EzeeCube supports Gigabit Ethernet and can be connected to a home network via wifi or ethernet cable. iOS, Android, Mac or Windows devices on the same network can pair with EzeeCube to sync content from these devices automatically. EzeeCube can boot in USB mode to flash custom firmware via USB OTG port in the back. It also has an SD card reader, optical audio port for audio passthrough and a USB 2.0 port.

== '''Stacking Specs''' ==
There are total of 6 pins exposed on the top and bottom of the base EzeeCube unit as well as stackable accessories. Stacks can be placed on top or below the base unit. Data and control transfer between the base unit and the stacks is via USB 2.0. A 12V5A power supply is provided on other pins.

[[File:main.1156 copy.png|400px]]

== '''Pre-Installed Packages''' ==
'''Customised Kodi''' - EzeeCube is based on Kodi’s official open source code and customised to automatically sync photos, videos and contacts from iOS/Android devices. It uses a new skin designed to work in 1080p.

'''OwnCloud server''' - EzeeCube comes with OwnCloud servers pre-installed and configured that stores media and documents files. They are accessible via OwnCloud cross platform client application, on your TV via Kodi or the EzeeSync app for iOS, Android, Mac and Windows.

'''FTP Server''' - EzeeCube comes with a FTP server pre-installed and configured which lets the user access and edit media content and files stored on EzeeCube. It works with all standard FTP client applications across platforms.

== '''Comparison of EzeeCube With Other Platforms''' ==

[[File:Comparison of EzeeCube.png|600px]]

== '''Links''' ==
EzeeCube Official Product Website http://www.ezeecube.tv

EzeeCube Forum http://forum.ezeecube.tv

[[Category:HTPC]]
[[Category:Linux]]
[[Category:ARM]]
[[Category:Hardware]]
[[Category:Freescale]]

Archive:EzeeCube

2015-07-16T05:05:39Z

Al 124:

{{mininav|[[Devices]]|[[ARM Hardware]]}}
{{device notice}}

{{Infobox information appliance
| name = EzeeCube
| image = [[File:EZ1.jpg|300px]]
| cpu = Freescale iMX6 Cortex A9 Quad Core 1.0 Ghz (MCIMX6D5EYM10AD) 
| graphics = Vivante GC2000 
| os = Custom Yocto Linux
| memory = 2GB DDR3 64bits 1066Mhz
| storage = eMMC 4GB flash <br/> 1 Terabyte, 5400RPM, 2.5" 
| connectivity = HDMI 1.4<br/> 1Gbit Ethernet  <br/> IEEE 802.11 2.4Ghz WiFi   <br/> USB2.0
}}
[[File:WM_EZEECUBE_MAIN_REAR_1_1.jpg|310px|EzeeCube Connectivity|thumb]]

<section begin="intro" />'''EzeeCube''' is an expandable smart media centre developed and sold by Ezee Systems Limited. It supports cross platform connectivity between iOS, Android, Mac and Windows devices. It stores photos and media content from up to 6 devices. All content can be accessed from the connected HDTV and any paired devices. EzeeCube comes with a customised version of Kodi pre-installed and pre-configured. Media content can be synced using the EzeeSync app for iOS/Android devices or Mac/Windows.

EzeeCube was crowdfunded via Indiegogo in June 2014, and reached 196% of its target. The campaign included the EzeeCube base unit, add-on storage, and an add-on blu-ray player. EzeeCube started shipping in June 2015. <section end="intro" />

<br/>

== '''Features''' ==
EzeeCube comes with a 1TB or 2TB hard disk. It is expandable using the patent-pending Stack-To-Extend technology. EzeeCube also makes an add-on storage stack and a blu-ray player stack which can be purchased separately. Both these add-ons require no wires or setup.

It is an HDMI compliant device that connects to a HD television through the HDMI port. It can be controlled either by the IR remote control that comes with the EzeeCube base unit or any CEC remote control.

EzeeCube comes with Personal Video Recording (PVR) head-end pre-configured for watching and recording off the TV programming. It also supports hardware de-interlacing of the frames.

[[File:Ezee_remote1.png|500px]]

== '''Connectivity and Ports'''==
EzeeCube supports Gigabit Ethernet and can be connected to a home network via wifi or ethernet cable. iOS, Android, Mac or Windows devices on the same network can pair with EzeeCube to sync content from these devices automatically. EzeeCube can boot in USB mode to flash custom firmware via USB OTG port in the back. It also has an SD card reader, optical audio port for audio passthrough and a USB 2.0 port.

== '''Stacking Specs''' ==
There are total of 6 pins exposed on the top and bottom of the base EzeeCube unit as well as stackable accessories. Stacks can be placed on top or below the base unit. Data and control transfer between the base unit and the stacks is via USB 2.0. A 12V5A power supply is provided on other pins.

[[File:main.1156 copy.png|400px]]

== '''Pre-Installed Packages''' ==
'''Customised Kodi''' - EzeeCube is based on Kodi’s official open source code and customised to automatically sync photos, videos and contacts from iOS/Android devices. It uses a new skin designed to work in 1080p.

'''OwnCloud server''' - EzeeCube comes with OwnCloud servers pre-installed and configured that stores media and documents files. They are accessible via OwnCloud cross platform client application, on your TV via Kodi or the EzeeSync app for iOS, Android, Mac and Windows.

'''FTP Server''' - EzeeCube comes with a FTP server pre-installed and configured which lets the user access and edit media content and files stored on EzeeCube. It works with all standard FTP client applications across platforms.

== '''Comparison of EzeeCube With Other Platforms''' ==

[[File:Comparison of EzeeCube.png|600px]]

== '''Links''' ==
EzeeCube Official Product Website http://www.ezeecube.tv
EzeeCube Forum http://forum.ezeecube.tv

[[Category:HTPC]]
[[Category:Linux]]
[[Category:ARM]]
[[Category:Hardware]]
[[Category:Freescale]]

Archive:EzeeCube

2015-07-16T03:29:23Z

Al 124:

{{mininav|[[Devices]]|[[ARM Hardware]]}}
{{device notice}}

{{Infobox information appliance
| name = EzeeCube
| image = [[File:EZ1.jpg|300px]]
| cpu = Freescale iMX6 Cortex A9 Quad Core 1.0 Ghz (MCIMX6D5EYM10AD) 
| graphics = Vivante GC2000 
| os = Custom Yocto Linux
| memory = 2GB DDR3 64bits 1066Mhz
| storage = eMMC 4GB flash <br/>  1 Terabyte, 5400RPM, 2.5" 
| connectivity = HDMI 1.4<br/> 1Gbit Ethernet  <br/> IEEE 802.11 2.4Ghz WiFi   <br/> USB2.0
}}
[[File:WM_EZEECUBE_MAIN_REAR_1_1.jpg|310px|EzeeCube Connectivity|thumb]]

<section begin="intro" />'''EzeeCube''' is an expandable smart media centre developed and sold by Ezee Systems Limited. It supports cross platform connectivity between iOS, Android, Mac and Windows devices. It stores photos and media content from up to 6 devices. All content can be accessed from the connected HDTV and any paired devices. EzeeCube comes with a customised version of Kodi pre-installed and pre-configured. Media content can be synced using the EzeeSync app for iOS/Android devices or Mac/Windows.

EzeeCube was crowdfunded via Indiegogo in June 2014, and reached 196% of its target. The campaign included the EzeeCube base unit, add-on storage, and an add-on blu-ray player. EzeeCube started shipping in June 2015. <section end="intro" />

<br/>

== '''Features''' ==
EzeeCube comes with a 1TB or 2TB hard disk. It is expandable using the patent-pending Stack-To-Extend technology. EzeeCube also makes an add-on storage stack and a blu-ray player stack which can be purchased separately. Both these add-ons require no wires or setup.

It is an HDMI compliant device that connects to a HD television through the HDMI port. It can be controlled either by the IR remote control that comes with the EzeeCube base unit or any CEC remote control.

EzeeCube comes with Personal Video Recording (PVR) head-end pre-configured for watching and recording off the TV programming. It also supports hardware de-interlacing of the frames.

[[File:Ezee_remote1.png|500px]]

== '''Connectivity and Ports'''==
EzeeCube supports Gigabit Ethernet and can be connected to a home network via wifi or ethernet cable. iOS, Android, Mac or Windows devices on the same network can pair with EzeeCube to sync content from these devices automatically. EzeeCube can boot in USB mode to flash custom firmware via USB OTG port in the back. It also has an SD card reader, optical audio port for audio passthrough and a USB 2.0 port.

== '''Stacking Specs''' ==
There are total of 6 pins exposed on the top and bottom of the base EzeeCube unit as well as stackable accessories. Stacks can be placed on top or below the base unit. Data and control transfer between the base unit and the stacks is via USB 2.0. A 12V5A power supply is provided on other pins.

[[File:main.1156 copy.png|400px]]

== '''Pre-Installed Packages''' ==
'''Customised Kodi''' - EzeeCube is based on Kodi’s official open source code and customised to automatically sync photos, videos and contacts from iOS/Android devices. It uses a new skin designed to work in 1080p.

'''OwnCloud server''' - EzeeCube comes with OwnCloud servers pre-installed and configured that stores media and documents files. They are accessible via OwnCloud cross platform client application, on your TV via Kodi or the EzeeSync app for iOS, Android, Mac and Windows.

'''FTP Server''' - EzeeCube comes with a FTP server pre-installed and configured which lets the user access and edit media content and files stored on EzeeCube. It works with all standard FTP client applications across platforms.

== '''Comparison of EzeeCube With Other Platforms''' ==

[[File:Comparison of EzeeCube.png|600px]]

== '''Links''' ==
EzeeCube Official Product Website http://www.ezeecube.tv
EzeeCube Forum http://forum.ezeecube.tv

[[Category:HTPC]]
[[Category:Linux]]
[[Category:ARM]]
[[Category:Hardware]]
[[Category:Freescale]]

Archive:EzeeCube

2015-07-16T03:13:56Z

Al 124:

{{mininav|[[Devices]]|[[ARM Hardware]]}}
{{device notice}}

{{Infobox information appliance
| name = EzeeCube
| image = [[File:EZ1.jpg|300px]]
| cpu = Freescale iMX6 Cortex A9 Quad Core 1.0 Ghz (MCIMX6D5EYM10AD) 
| graphics = Vivante GC2000 
| os = Custom Yocto Linux
| memory = 2GB DDR3 64bits 1066Mhz
| storage = eMMC 4GB flash <br/>  1 Terabyte, 5400RPM, 2.5" 
| connectivity = HDMI 1.4<br/> 1Gbit Ethernet  <br/> IEEE 802.11 2.4Ghz WiFi   <br/> USB2.0
}}
[[File:WM_EZEECUBE_MAIN_REAR_1_1.jpg|310px|EzeeCube Connectivity|thumb]]

<section begin="intro" />'''EzeeCube''' is an expandable smart media centre developed and sold by Ezee Systems Limited. It supports cross platform connectivity between iOS, Android, Mac and Windows devices. It stores photos and media content from up to 6 devices. All content can be accessed from the connected HDTV and any paired devices. EzeeCube comes with a customised version of Kodi pre-installed and pre-configured. Media content can be synced using the EzeeSync app for iOS/Android devices or Mac/Windows.

EzeeCube was crowdfunded via Indiegogo in June 2014, and reached 196% of its target. The campaign included the EzeeCube base unit, add-on storage, and an add-on blu-ray player. EzeeCube started shipping in June 2015. <section end="intro" />

<br/>

== '''Features''' ==
EzeeCube comes with a 1TB or 2TB hard disk. It is expandable using the patent-pending Stack-To-Extend technology. EzeeCube also makes an add-on storage stack and a blu-ray player stack which can be purchased separately. Both these add-ons require no wires or setup.

It is an HDMI compliant device that connects to a HD television through the HDMI port. It can be controlled either by the IR remote control that comes with the EzeeCube base unit or any CEC remote control.

EzeeCube comes with Personal Video Recording (PVR) head-end pre-configured for watching and recording off the TV programming. It also supports hardware de-interlacing of the frames.

[[File:Ezee_remote1.png|500px]]

== '''Connectivity and Ports'''==
EzeeCube supports Gigabit Ethernet and can be connected to a home network via wifi or ethernet cable. iOS, Android, Mac or Windows devices on the same network can pair with EzeeCube to sync content from these devices automatically. EzeeCube can boot in USB mode to flash custom firmware via USB OTG port in the back. It also has an SD card reader, optical audio port for audio passthrough and a USB 2.0 port.

== '''Stacking Specs''' ==
There are total of 6 pins exposed on the top and bottom of the base EzeeCube unit as well as stackable accessories. Stacks can be placed on top or below the base unit. Data and control transfer between the base unit and the stacks is via USB 2.0. A 12V5A power supply is provided on other pins.

[[File:main.1156 copy.png|400px]]

== '''Pre-Installed Packages''' ==
'''Customised Kodi''' - EzeeCube is based on Kodi’s official open source code and customised to automatically sync photos, videos and contacts from iOS/Android devices. It uses a new skin designed to work in 1080p.

'''OwnCloud server''' - EzeeCube comes with OwnCloud servers pre-installed and configured that stores media and documents files. They are accessible via OwnCloud cross platform client application, on your TV via Kodi or the EzeeSync app for iOS, Android, Mac and Windows.

'''FTP Server''' - EzeeCube comes with a FTP server pre-installed and configured which lets the user access and edit media content and files stored on EzeeCube. It works with all standard FTP client applications across platforms.

== '''Comparison of EzeeCube With Other Platforms''' ==

[[File:Comparison of EzeeCube.png|600px]]

== '''Links''' ==
EzeeCube Official Product Website http://www.ezeecube.tv

[[Category:HTPC]]
[[Category:Linux]]
[[Category:ARM]]
[[Category:Hardware]]
[[Category:Freescale]]

File:Comparison of EzeeCube.png

2015-07-16T03:13:21Z

Al 124: MsUpload

MsUpload

File:Comparison of EzeeCube's Competitors.png

2015-07-16T03:08:30Z

Al 124: MsUpload

MsUpload

Archive:EzeeCube

2015-07-16T03:03:15Z

Al 124:

{{mininav|[[Devices]]|[[ARM Hardware]]}}
{{device notice}}

{{Infobox information appliance
| name = EzeeCube
| image = [[File:EZ1.jpg|300px]]
| cpu = Freescale iMX6 Cortex A9 Quad Core 1.0 Ghz (MCIMX6D5EYM10AD) 
| graphics = Vivante GC2000 
| os = Custom Yocto Linux
| memory = 2GB DDR3 64bits 1066Mhz
| storage = eMMC 4GB flash <br/>  1 Terabyte, 5400RPM, 2.5" 
| connectivity = HDMI 1.4<br/> 1Gbit Ethernet  <br/> IEEE 802.11 2.4Ghz WiFi   <br/> USB2.0
}}
[[File:WM_EZEECUBE_MAIN_REAR_1_1.jpg|310px|EzeeCube Connectivity|thumb]]

<section begin="intro" />'''EzeeCube''' is an expandable smart media centre developed and sold by Ezee Systems Limited. It supports cross platform connectivity between iOS, Android, Mac and Windows devices. It stores photos and media content from up to 6 devices. All content can be accessed from the connected HDTV and any paired devices. EzeeCube comes with a customised version of Kodi pre-installed and pre-configured. Media content can be synced using the EzeeSync app for iOS/Android devices or Mac/Windows.

EzeeCube was crowdfunded via Indiegogo in June 2014, and reached 196% of its target. The campaign included the EzeeCube base unit, add-on storage, and an add-on blu-ray player. EzeeCube started shipping in June 2015. <section end="intro" />

<br/>

== '''Features''' ==
EzeeCube comes with a 1TB or 2TB hard disk. It is expandable using the patent-pending Stack-To-Extend technology. EzeeCube also makes an add-on storage stack and a blu-ray player stack which can be purchased separately. Both these add-ons require no wires or setup.

It is an HDMI compliant device that connects to a HD television through the HDMI port. It can be controlled either by the IR remote control that comes with the EzeeCube base unit or any CEC remote control.

EzeeCube comes with Personal Video Recording (PVR) head-end pre-configured for watching and recording off the TV programming. It also supports hardware de-interlacing of the frames.

[[File:Ezee_remote1.png|500px]]

== '''Connectivity and Ports'''==
EzeeCube supports Gigabit Ethernet and can be connected to a home network via wifi or ethernet cable. iOS, Android, Mac or Windows devices on the same network can pair with EzeeCube to sync content from these devices automatically. EzeeCube can boot in USB mode to flash custom firmware via USB OTG port in the back. It also has an SD card reader, optical audio port for audio passthrough and a USB 2.0 port.

== '''Stacking Specs''' ==
There are total of 6 pins exposed on the top and bottom of the base EzeeCube unit as well as stackable accessories. Stacks can be placed on top or below the base unit. Data and control transfer between the base unit and the stacks is via USB 2.0. A 12V5A power supply is provided on other pins.

[[File:main.1156 copy.png|400px]]

== '''Pre-Installed Packages''' ==
'''Customised Kodi''' - EzeeCube is based on Kodi’s official open source code and customised to automatically sync photos, videos and contacts from iOS/Android devices. It uses a new skin designed to work in 1080p.

'''OwnCloud server''' - EzeeCube comes with OwnCloud servers pre-installed and configured that stores media and documents files. They are accessible via OwnCloud cross platform client application, on your TV via Kodi or the EzeeSync app for iOS, Android, Mac and Windows.

'''FTP Server''' - EzeeCube comes with a FTP server pre-installed and configured which lets the user access and edit media content and files stored on EzeeCube. It works with all standard FTP client applications across platforms.

== '''Links''' ==
EzeeCube Official Product Website http://www.ezeecube.tv

[[Category:HTPC]]
[[Category:Linux]]
[[Category:ARM]]
[[Category:Hardware]]
[[Category:Freescale]]

Archive:EzeeCube

2015-07-16T02:58:54Z

Al 124:

{{mininav|[[Devices]]|[[ARM Hardware]]}}
{{device notice}}

{{Infobox information appliance
| name = EzeeCube
| image = [[File:EZ1.jpg|300px]]
| cpu = Freescale iMX6 Cortex A9 Quad Core 1.0 Ghz (MCIMX6D5EYM10AD) 
| graphics = Vivante GC2000 
| os = Custom Yocto Linux
| memory = 2GB DDR3 64bits 1066Mhz
| storage = eMMC 4GB flash <br/>  1 Terabyte, 5400RPM, 2.5" 
| connectivity = HDMI 1.4<br/> 1Gbit Ethernet  <br/> IEEE 802.11 2.4Ghz WiFi   <br/> USB2.0
}}
[[File:WM_EZEECUBE_MAIN_REAR_1_1.jpg|310px|EzeeCube Connectivity|thumb]]

<section begin="intro" />'''EzeeCube''' is an expandable smart media centre developed and sold by Ezee Systems Limited. It supports cross platform connectivity between iOS, Android, Mac and Windows devices. It stores photos and media content from up to 6 devices. All content can be accessed from the connected HDTV and any paired devices. EzeeCube comes with a customised version of Kodi pre-installed and pre-configured. Media content can be synced using the EzeeSync app for iOS/Android devices or Mac/Windows.

EzeeCube was crowdfunded via Indiegogo in June 2014, and reached 196% of its target. The campaign included the EzeeCube base unit, add-on storage, and an add-on blu-ray player. EzeeCube started shipping in June 2015 <section end="intro" />

<br/>

== '''Features''' ==
EzeeCube comes with a 1TB or 2TB hard disk. It is expandable using the patent-pending Stack-To-Extend technology. EzeeCube also makes an add-on storage stack and a blu-ray player stack which can be purchased separately. Both these add-ons require no wires or setup.

It is an HDMI compliant device that connects to a HD television through the HDMI port. It can be controlled either by the IR remote control that comes with the EzeeCube base unit or any CEC remote control.

EzeeCube comes with Personal Video Recording (PVR) head-end pre-configured for watching and recording off the TV programming. It also supports hardware de-interlacing of the frames.

[[File:Ezee_remote1.png|500px]]

== '''Connectivity and Ports'''==
EzeeCube supports Gigabit Ethernet and can be connected to a home network via wifi or ethernet cable. iOS, Android, Mac or Windows devices on the same network can pair with EzeeCube to sync content from these devices automatically. EzeeCube can boot in USB mode to flash custom firmware via USB OTG port in the back. It also has an SD card reader, optical audio port for audio passthrough and a USB 2.0 port.

== '''Stacking Specs''' ==
There are total of 6 pins exposed on the top and bottom of the base EzeeCube unit as well as stackable accessories. Stacks can be placed on top or below the base unit. Data and control transfer between the base unit and the stacks is via USB 2.0. A 12V5A power supply is provided on other pins.

[[File:main.1156 copy.png|400px]]

== '''Pre-Installed Packages''' ==
'''Customised Kodi''' - EzeeCube is based on Kodi’s official open source code and customised to automatically sync photos, videos and contacts from iOS/Android devices. It uses a new skin designed to work in 1080p.

'''OwnCloud server''' - EzeeCube comes with OwnCloud servers pre-installed and configured that stores media and documents files. They are accessible via OwnCloud cross platform client application, on your TV via Kodi or the EzeeSync app for iOS, Android, Mac and Windows.

'''FTP Server''' - EzeeCube comes with a FTP server pre-installed and configured which lets the user access and edit media content and files stored on EzeeCube. It works with all standard FTP client applications across platforms.

==References==
{{reflist}}

== See also ==
* [[All platforms FAQ]]
* [[Linux]]
** [[Linux FAQ|{{Kodi}} for Linux specific FAQ]]
* [[Freescale]] - Other Freescale based devices which also runs {{Kodi}}.

== Links ==
* http://www.ezeecube.tv EzeeCube Official Product Website

[[Category:HTPC]]
[[Category:Linux]]
[[Category:ARM]]
[[Category:Hardware]]
[[Category:Freescale]]

File:WM EZEECUBE MAIN REAR 1 1.jpg

2015-07-16T02:05:57Z

Al 124: MsUpload

MsUpload

File:Main.1156 copy.png

2015-07-16T02:00:32Z

Al 124: MsUpload

MsUpload

File:EZ1.jpg

2015-07-16T01:55:53Z

Al 124: MsUpload

MsUpload

File:Ezee remote1.png

2015-07-16T01:51:59Z

Al 124: MsUpload

MsUpload

File:Ezee remote.png

2015-07-16T01:46:54Z

Al 124: MsUpload

MsUpload

File:EZ.jpg

2015-07-16T01:39:59Z

Al 124: MsUpload

MsUpload