|These pages are maintained by the community and should not be considered an endorsement or recommendation. Device pages are made when there's a bunch of useful information for a particular device, and someone takes the time to make that page. Keep in mind, some devices simply don't need a page of specific information, but are still excellent devices. *|
Wandboard is an ARM-based development board that is capable of running either Kodi on Android or on Linux, both using firmware images provided by WandboardWandboard development team and third-parties of which many comes with Kodi pre-installed.
Wandboard uses scalable and open source friendly Freescale i.MX6 family of SoC (System-on-Chip) ranging from a single to quad ARM Cortex-A9 processor cores, 2D/3D hardware graphics processing unit, video decoding and encoding acceleration hardware, and HDMI 1.4 1080p 3D output support.
1 Installing Kodi
The easiest way to use Kodi on a Wandboard is to just install a Kodi-specific OS to your mSD card with one of the following OS's. The Wandboard will boot directly up into Kodi and nearly every setting can be easily configured within the Kodi GUI
Kodi can also be installed onto a Wandboard that is running Android using the normal Android instructions.