Archive:Install Kodi on Apple TV 2

From Official Kodi Wiki
Revision as of 01:13, 13 May 2015 by NedBot (talk | contribs) (web link corrections for xbmc.org -> kodi.tv)
Jump to navigation Jump to search
Home icon grey.png   ▶ iOS ▶ ATV2 ▶ Install Kodi on Apple TV 2

Template:Atv2 farewell

The current stable release for iOS is Kodi v20.5 Nexus.

Requirements
  • If you have any issues, be sure to read the iOS FAQ!


Template:Kodi migration note

Installing from the command line

  1. Open up your terminal/ssh application and enter the following command to log in to your ATV2. Note, you need to replace "YOUR.ATV2.IP.ADDRESS" with the IP address of the Apple TV:
    ssh [email protected]
    EXAMPLE: ssh [email protected]
  2. You will be asked for a password: default password is alpine
  3. Continue to enter the following commands:
    apt-get install wget
    wget -O- http://apt.awkwardtv.org/awkwardtv.pub | apt-key add -
    echo "deb http://apt.awkwardtv.org/ stable main" > /etc/apt/sources.list.d/awkwardtv.list
    echo "deb http://mirrors.kodi.tv/apt/atv2 ./" > /etc/apt/sources.list.d/xbmc.list
    apt-get update
    apt-get install org.xbmc.kodi-atv2
    reboot

And you're done! You should now be running Kodi v20.5 Nexus for Apple TV 2. See here to verify your Kodi version.

Installing from NitoTV

Emblem-important-yellow.png NOTICE:
While this should work in theory, the official installation method for Kodi is to use the command line instructions. If you have issues with any of the Nito installers then please try the command line instructions to see if that fixes the issue. Nito simply gives a GUI for those command line instructions, so it should work, but Team Kodi has no control over those installers and cannot update them or see any errors from them, or anything like that.
NitoTV on the Apple TV 2
  1. Scroll right to the NitoTV menu on the Apple TV and choose the first option "Install Software".
  2. Scroll down the list until you see "Kodi-ATV2" and click on that.
  3. From that menu press "install" and your Apple TV will install Kodi and then do a SOFT reboot (no tethered boot required).
  4. Kodi will now be in your Apple TV menu, scroll right to it, click and enjoy.

And you're done! You should now be running Kodi v20.5 Nexus for Apple TV 2. See here to verify your Kodi version.

Updating

Either update through NitoTV or issue the following commands to update:

  1. Open up your terminal/ssh application and enter the following command to log in to your ATV2:
    ssh [email protected]
    EXAMPLE: ssh [email protected]
  2. You will be asked for a password: default password is alpine
  3. Continue to enter the following commands:
    apt-get update
    apt-get install org.xbmc.kodi-atv2

Development and custom builds

ALWAYS BACKUP YOUR USERDATA FOLDER WHEN USING DEVELOPMENT BUILDS!

Build Description URL
Nightly build Nightly builds are unstable test builds that have the latest bug fixes and feature additions. They are not fully tested, so anticipate issues and be sure to backup your userdata folder http://mirrors.kodi.tv/nightlies/darwin/atv2/
Monthly build Monthly builds are more stable than nightly builds, but still contain lots of experimental new code. http://mirrors.kodi.tv/snapshots/darwin/atv2/
Betas and release candidates Betas and release candidates are builds that are being tested to see if they have any bugs left before becoming a stable release. Most major bugs should be fixed in these builds. http://mirrors.kodi.tv/apt/pre-release/atv2/deb/
Older stable builds If you wish to download an older version of Kodi for whatever reason, you can do so with these same instructions below. http://mirrors.kodi.tv/apt/atv2/deb/
  1. Open one of the above URL locations in a web browser and copy the url of the most recent file in that listing.
    EXAMPLE: http://mirrors.kodi.tv/nightlies/darwin/atv2/kodi-20150120-e740097-master-atv2.deb
  2. Open up your terminal/ssh application and enter the following command to log in to your ATV2:
    ssh [email protected]
    EXAMPLE: ssh [email protected]
  3. You will be asked for a password: default password is alpine
  4. Continue to enter the following commands:
    rm -f *kodi*.deb
    apt-get update
    wget URL-FROM-STEP-ONE-HERE
    EXAMPLE: wget http://mirrors.kodi.tv/nightlies/darwin/atv2/kodi-20150120-e740097-master-atv2.deb
    dpkg -i *kodi*.deb
    rm *kodi*.deb

See here to verify your Kodi version.

Note: To go back to a stable version of Kodi you might need to first uninstall Kodi and then use the normal install instructions, or manually download the stable release deb file and install using the dev build instructions.


Going from Kodi to XBMC

Due to the name change, the steps for downgrading between Kodi (starting at v14 and up) to XBMC (v13.2 and lower) requires slightly different steps:

  1. Open one of the above URL locations in a web browser and copy the url of the version you wish to install.
    EXAMPLE: http://mirrors.kodi.tv/apt/atv2/deb/old/org.xbmc.xbmc-atv2_12.2-0_iphoneos-arm.deb
  2. Open up your terminal/ssh application and enter the following command to log in to your ATV2:
    ssh [email protected]
    EXAMPLE: ssh [email protected]
  3. You will be asked for a password: default password is alpine
  4. Continue to enter the following commands:
    rm -f *kodi*.deb
    rm -f *xbmc*.deb
    apt-get update
    wget URL-FROM-STEP-ONE-HERE
    EXAMPLE: wget http://mirrors.kodi.tv/apt/atv2/deb/old/org.xbmc.xbmc-atv2_12.2-0_iphoneos-arm.deb
    wget http://mirrors.kodi.tv/apt/atv2/deb/org.xbmc.xbmc-seatbeltunlock_1.0-5_iphoneos-arm.deb
    dpkg -i *xbmc*.deb
    rm *xbmc*.deb

See here to verify your Kodi version.

Uninstalling

Uninstalling just Kodi

SSH into your Apple TV (Using the same instructions from above to login). Then run:

 apt-get remove org.xbmc.xbmc-atv2

or

 apt-get remove org.xbmc.kodi-atv2

It will ask you if you want to continue:

The following packages will be REMOVED:
  org.xbmc.kodi-atv2
0 upgraded, 0 newly installed, 1 to remove and 5 not upgraded.
After this operation, 0B of additional disk space will be used.
Do you want to continue [Y/n]?

Just enter "Y" to accept and continue.

Removing settings

Kodi will uninstall from your Apple TV but will leave certain things (databases and everything in your userdata folder) behind to make it easier if you wanted to reinstall. To delete those also run:

rm -Rf /private/var/mobile/Library/Preferences/XBMC
rm -Rf /private/var/mobile/Library/Preferences/Kodi

This will then be completely clear and Kodi will be removed.

Deleting Kodi dependencies

Kodi has three dependencies that it installs along with itself when you first install Kodi (org.xbmc.xbmc-seatbeltunlock, gawk, bsdiff). After uninstalling Kodi you can also uninstall these 3 dependencies by running this command:

apt-get remove org.xbmc.xbmc-seatbeltunlock && apt-get remove gawk && apt-get remove bsdiff && apt-get remove org.xbmc.kodi-seatbeltunlock